Dây Cáp Cao Su Helukabel H07RN-F | Chính Hãng – Rubber Cable – Giá Tốt Nhất

H07RN-F

rubber-sheathed cable

Technical data

• Rubber sheathed cable H07RN-F to
  DIN VDE 0285-525-2-21, BS 7919
  DIN EN 50525-2-21, IEC 60245-4
• Temperature range 
  flexing -25°C bis +60°C
  fixed installation -30°C bis +60°C
• Permissible conductor operating
  temperature +60°C
• Nominal voltage 
  U₀/U 450/750 V
  in case of protected and fixed installation
  U₀/U 600/1000 V
• Max. permissible operating voltage
  – 3-Phase and single phase
  operation  476/825 V
  – DC operation  619/1238 V
• Test voltage 
  2500 V
• Permanent tensile load
  max. 15 N/mm²
• Minimum bending radius 
  for fixed installation 4x cable Ø
  for guiding over roller 7,5x cable Ø
  during winding on drums 5x cable Ø

Cable structure

• Bare copper conductor, to
  DIN VDE 0295 cl.5, fine wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of rubber EI4 to
  DIN VDE 0207-363-1 / DIN EN 50363-1
• Core identification to DIN VDE 0293-308
  – up to 5 cores coloured
  – from 6 cores, black with continuous
  white numbering
• GN-YE conductor, 3 cores and above
• Cores stranded in layers with
  optimal lay length
• Outer sheath of rubber EM2 to
  DIN VDE 0207-363-2-1/DIN EN 50363-2-1
• Sheath colour: black

Properties

Resistant to

• Weather

Tests

• Self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2, IEC 60332-1-2
• Ozone resistant of the insulation to
  DIN VDE 0473-396, DIN EN 50396
• Oil resistant test acc. to
  DIN VDE 0473-811-404,
  DIN EN 60811-404

Note

• G = with GN-YE conductor
  x = without GN-YE conductor
• AWG sizes are approximate equivalent
  values. The actual cross section is in mm².
• The core identification of a single core
  sheathed, of an insulated wire is black.
• adapted to VDE with
  designation 07RN-F
  – Part.-no. 37094,  19G1,5 mm²
  – Part.-no. 37098,  19G2,5 mm²
  – Part.-no. 34349,  5G120 mm²
  – Part.-no. 34127,  5G150 mm²

Application

Heavy duty rubber-sheathed flexible cables are suited for use for medium mechanical stress in dry, damp and wet areas as well as in open air and in agriculture plants. They are used for equipment in industry works such as boilers, heating plates, hand lamps, electric tools such as drills, circular saws and homework tools as well as for transportable motors or machines at site. These cables are also suitable for fixed installation on plaster, in temporary buildings and residential barracks. They are suitable for direct laying on components and mechanical parts of machines, for example lifts and cranes. They can be used in case of protected and fixed installation in tubes or in equipment as well as rotor connecting cable of motors with a working voltage up to 1000 V alternating voltage or a direct voltage up to 750 V against ground.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet