Cáp Điều Khiển Helukabel ( JB-500 ) | Chính Hãng-Giá Tốt Nhất

Cáp Điều Khiển Helukabel ( JB-500 ) | Chính Hãng-Giá Tốt Nhất

JB-500

flexible, colour coded, meter marking

Technical data
  • Adapted to DIN VDE 0285-525-2-11/
    DIN EN 50525-2-11
  • Temperature range 
    flexing -15°C to +80°C
    fixed installation -40°C to +80°C
  • Nominal voltage 
    U0/U 300/500 V
  • Test voltage 
    4000 V
  • Breakdown voltage 
    min. 8000 V
  • Insulation resistance 
    min. 20 MOhm x km
  • Minimum bending radius 
    flexing 7,5x cable Ø
    fixed installation 4x cable Ø
  • Radiation resistance 
    up to 80×106 cJ/kg (up to 80 Mrad)
Cable structure
  • Bare copper conductor, to
    DIN VDE 0295 cl.5, fine wire,
    BS 6360 cl.5, IEC 60228 cl.5
  • Core insulation of special PVC
    compound type Z 7225
  • Core identification to JB/OB colour code
  • GN-YE conductor, 3 cores and above
    in the outer layer
  • Cores stranded in layers with
    optimal lay length
  • Outer sheath of special PVC
    compound type TM2 to
    DIN VDE 0207-363-4-1/DIN EN 50363-4-1
  • Sheath colour: grey (RAL 7001)
  • With meter marking
  • From 5 cores with VDE-Reg-Nr.
Properties
  • Extensively oil resistant,
    oil-/chemical resistance
    see table Technical Informations
  • The materials used during manufacturing
    are cadmium-free, contain no silicone
    and are free from substances harmful
    to the wetting properties of lacquers

Tests

  • PVC self-extinguishing and flame retardant
    acc. to DIN VDE 0482-332-1-2,
    DIN EN 60332-1-2, IEC 60332-1 (equivalent
    DIN VDE 0472 part 804 test method B)
Note
  • G = with GN-YE conductor
    x = without GN-YE conductor (OB)
  • AWG sizes are approximate equivalent
    values. The actual cross section is in mm².
  • Screened analogue type:
    Y-CY-JB see page
Application
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, as measuring and control cables in tool machinery, conveyor belts, production lines, as well as in machinery production, in air-conditioning and steel production plants. The earth core is located immediately below the outer sheath. JB cables are suitable for use in all electrical equipment either in dry or damp areas. They should not, however, be installed in the open air.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.
Downloads
Data sheet 
Certificate of compliance
Part no. No.cores x
cross-sec.
mm²
Outer Ø

approx. mm

Cop.
weight

kg / km

Weight

approx. kg / km

AWG-No.
11001 2 x 0,5 4,8 9,6 40,0 20
11002 3 G 0,5 5,1 14,4 46,0 20
11003 3 x 0,5 5,1 14,4 46,0 20
11004 4 G 0,5 5,5 19,2 56,0 20
11005 4 x 0,5 5,5 19,2 56,0 20
11006 5 G 0,5 6,2 24,0 65,0 20
11007 5 x 0,5 6,2 24,0 65,0 20
11008 6 G 0,5 6,7 29,0 75,0 20
11009 7 G 0,5 6,7 34,0 80,0 20
11010 7 x 0,5 6,7 34,0 84,0 20
11011 8 G 0,5 7,4 38,0 97,0 20
11012 10 G 0,5 8,2 48,0 116,0 20
11013 12 G 0,5 8,7 58,0 135,0 20
11014 14 G 0,5 9,5 67,0 150,0 20
11015 16 G 0,5 10,0 77,0 172,0 20
11019 30 G 0,5 13,5 144,0 310,0 20
11026 2 x 0,75 5,3 14,4 46,0 19
11027 3 G 0,75 5,6 21,6 54,0 19
11028 3 x 0,75 5,6 21,6 54,0 19
11029 4 G 0,75 6,3 28,8 66,0 19
11030 4 x 0,75 6,3 28,8 66,0 19
11031 5 G 0,75 6,9 36,0 80,0 19
11032 5 x 0,75 6,9 36,0 80,0 19
11033 6 G 0,75 7,5 43,2 99,0 19
11034 7 G 0,75 7,5 50,0 110,0 19
11035 7 x 0,75 7,5 50,0 110,0 19
11036 8 G 0,75 8,3 58,0 130,0 19
11037 9 G 0,75 8,9 65,0 153,0 19
11038 10 G 0,75 9,2 72,0 162,0 19
11039 12 G 0,75 9,8 86,0 179,0 19
11040 15 G 0,75 11,4 108,0 218,0 19
11041 18 G 0,75 12,2 130,0 257,0 19
11042 21 G 0,75 12,7 151,0 320,0 19
11043 25 G 0,75 14,3 180,0 365,0 19
11050 2 x 1 5,6 19,2 60,0 18
11051 3 G 1 5,9 29,0 72,0 18
11052 3 x 1 5,9 29,0 72,0 18
11053 4 G 1 6,6 38,4 86,0 18
11054 4 x 1 6,6 38,4 86,0 18
11055 5 G 1 7,3 48,0 104,0 18
11056 5 x 1 7,3 48,0 104,0 18
11057 6 G 1 8,1 58,0 125,0 18
11058 6 x 1 8,1 58,0 125,0 18
11059 7 G 1 8,1 67,0 141,0 18
11060 7 x 1 8,1 67,0 141,0 18
11061 8 G 1 8,8 77,0 175,0 18
11062 9 G 1 9,7 87,0 200,0 18
11063 10 G 1 9,8 96,0 207,0 18
11064 12 G 1 10,4 115,0 230,0 18
11065 14 G 1 11,4 134,0 271,0 18
11066 16 G 1 12,3 154,0 300,0 18
11067 18 G 1 12,9 173,0 343,0 18
11068 20 G 1 13,8 192,0 375,0 18
11069 24 G 1 15,1 230,0 468,0 18
11070 25 G 1 15,4 240,0 485,0 18
11077 2 x 1,5 6,4 29,0 70,0 16
11078 3 G 1,5 6,8 43,0 90,0 16
11079 3 x 1,5 6,8 43,0 90,0 16
11080 4 G 1,5 7,4 58,0 109,0 16
11081 4 x 1,5 7,4 58,0 109,0 16
11082 5 G 1,5 8,3 72,0 131,0 16
11083 5 x 1,5 8,3 72,0 131,0 16
11084 6 G 1,5 9,2 86,4 157,0 16
11085 7 G 1,5 9,2 101,0 184,0 16
11086 7 x 1,5 9,2 101,0 184,0 16
11087 8 G 1,5 10,0 115,0 216,0 16
11088 11 G 1,5 11,6 158,0 300,0 16
11089 12 G 1,5 11,8 173,0 309,0 16
11090 14 G 1,5 13,0 202,0 345,0 16
11091 16 G 1,5 13,9 230,0 386,0 16
11092 18 G 1,5 14,6 259,0 440,0 16
11093 20 G 1,5 15,6 288,0 490,0 16
11094 25 G 1,5 17,4 360,0 620,0 16
11104 2 x 2,5 7,8 48,0 112,0 14
11105 3 G 2,5 8,3 72,0 148,0 14
11106 3 x 2,5 8,3 72,0 148,0 14
11107 4 G 2,5 9,2 96,0 178,0 14
11108 4 x 2,5 9,2 96,0 178,0 14
11109 5 G 2,5 10,1 120,0 221,0 14
11110 5 x 2,5 10,1 120,0 221,0 14
11111 6 G 2,5 11,2 144,0 293,0 14
11112 7 G 2,5 11,2 168,0 306,0 14
5/5 - (31 bình chọn)