• PVC control cable acc. to
  DIN VDE 0285-525-2-11 /
  DIN EN 50525-2-11 and IEC 60227-5
• Temperature range
  flexing -5°C to +70°C
  fixed installation -40°C to +70°C
• Nominal voltage U₀/U 300/500 V
• Max. permissible operating voltage in
  three-phase and one-phase a.c. system
  U₀/U 318/550 V
  in direct current system
  U₀/U 413/825 V
• Test voltage 2000 V
• Breakdown voltage min. 4000 V
• Insulation resistance
  min. 20 MOhm x km
• Minimum bending radius
  flexing 7,5x cable Ø
• Radiation resistance
  up to 80×10⁶ cJ/kg (up to 80 Mrad)

• Bare copper conductor, to
  DIN VDE 0295 cl.5, fine wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of PVC
  compound type TI2 to
  DIN VDE 0207-363-3 / DIN EN 50363-3
• Core identification to DIN VDE 0293-308
  – up to 5 cores coloured
  – from 6 cores, black with continuous
  white numbering
• GN-YE conductor, 3 cores and above
• Cores stranded in layers with
  optimal lay length
• Outer sheath of PVC
  compound type TM2 to
  DIN VDE 0207-363-4-1/DIN EN 50363-4-1
• Sheath colour: black or white

• The materials used during manufacturing
  are cadmium-free, contain no silicone
  and are free from substances harmful
  to the wetting properties of lacquers

Tests

• PVC self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2, IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)

• G = with green-yellow conductor
  x = without green-yellow conductor
• These types are also available with
  UL-approbation.
• The above list contains a selection of the
  types we carry as stock.
  Other sizes available on request.
• Cables with 7 cores and cross section
  6 mm² are only available in adaption
  designation 05VV-F.
• AWG sizes are approximate equivalent
  values. The actual cross section is in mm².