• Adapted to DIN VDE 0262
  and DIN VDE 0285-525-2-51 /
  DIN EN 50525-2-51
• Temperature range 
  flexing -15°C to +80°C
  fixed installation -40°C to +80°C
• Nominal voltage 
  U₀/U 0,6/1 kV
• Test voltage 
  4000 V
• Breakdown voltage 
  min. 8000 V
• Insulation resistance 
  min. 20 MOhm x km
• Coupling resistance 
  max. 250 Ohm/km
• Minimum bending radius 
  flexing 10x cable Ø
  fixed installation 5x cable Ø
• Radiation resistance 
  up to 80×10⁶ cJ/kg (up to 80 Mrad)

• Bare copper conductor, to
  DIN VDE 0295 cl.5, fine wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of Special PVC
  compound type TI2 to
  DIN VDE 0207-363-3 / DIN EN 50363-3
• Core identification to DIN VDE 0293
  black cores with continuous white
  numbering
• GN-YE conductor, 3 cores and above
  in the outer layer
• Cores stranded in layers with
  optimal lay length
• Inner sheath of PVC
• Tinned copper braided screen,
  approx. 85% coverage
• Outer sheath of special PVC
  compound type TM2 to
  DIN VDE 0207-363-4-1/DIN EN 50363-4-1
• Sheath colour: black (RAL 9005)
• With meter marking

• Extensively oil resistant,
  oil-/chemical resistance
  see “Technical Informations”
• The materials used during manufacturing
  are cadmium-free, contain no silicone
  and are free from substances harmful
  to the wetting properties of lacquers
• UV resistant

Tests

• PVC self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2, IEC 60332-1-2
  (equivalent DIN VDE 0472 part 804
  test method B)

• G = with GN-YE conductor
  x = without GN-YE conductor (OZ)
• Further sizes are available on request.
• AWG sizes are approximate equivalent
  values. The actual cross section is in mm².
• Unscreened analogue type:
  JZ-600