• Special-PVC control cable adapted
  to DIN VDE 0285-525-2-51/
  DIN EN 50525-2-51
• Temperature range 
  flexing -15°C to +80°C
  fixed installation -40°C to +80°C
• Nominal voltage 
  up to 1,5 mm² U₀/U 300/500 V
  from 2,5 mm² U₀/U 450/750 V
• Test voltage 4000 V
• Breakdown voltage min. 8000 V
• Insulation resistance 
  min. 20 MOhm x km
• Mutual capacitance
  acc. to different cross sections
  0,5 up to 2,5 mm²:
  core/core approx. 150 nF/km
  core/screen approx. 270 nF/km
• Coupling resistance 
  max. 250 Ohm/km
• Minimum bending radius 
  flexing 10x cable Ø
  fixed installation 5x cable Ø
• Radiation resistance 
  up to 80×10⁶ cJ/kg (up to 80 Mrad)

• Bare copper, fine wire conductors, bunch
  stranded to DIN VDE 0295 cl.5,
  BS 6360 cl.5 and IEC 60228 cl.5
• Core insulation of special PVC
  compound type Z 7225
• Core identification to JB/OB colour code
• GN-YE conductor, 3 cores and above
  in the outer layer
• Cores stranded in layers with
  optimal lay length
• Inner sheath of PVC
• Tinned copper braided screen,
  approx. 85% coverage
• Outer sheath of special PVC
• Sheath colour: transparent
• With meter marking

• Extensively oil resistant,
  oil-/chemical resistance
  see table Technical Informations
• The materials used during manufacturing
  are cadmium-free, contain no silicone
  and are free from substances harmful
  to the wetting properties of lacquers

Tests

• PVC self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2, IEC 60332-1 (equivalent
  DIN VDE 0472 part 804 test method B)

• G = with green-yellow conductor
  x = without green-yellow conductor (OB).
• up to 5 cores and cunductor cross section
  up to 1,5 mm² with VDE-Reg. No.
• AWG sizes are approximate equivalent
  values. The actual cross section is in mm².
• unscreened analogue type:
  JB-500
  JB-750