Cáp Điều Khiển Helukabel ( SENSORFLEX® ) | Chính Hãng-Giá Tốt Nhất
SENSORFLEX® |
sensor actuator cable, PVC, PUR, PVC/PUR |
 |
- Technical data
-
- Temperature range
flexing -5°C to +80°C
fixed installation -30°C to +80°C - Peak operating voltage
up to 0,25 mm² 350 V
from 0,34 mm² 500 V - A.c. test voltage, 50 Hz
up to 0,25 mm² 1200 V
from 0,34 mm² 2000 V - Minimum bending radius
SENSORFLEX® PUR 7,5x cable Ø
SENSORFLEX® PVC/PUR 7,5x cable Ø
SENSORFLEX® PVC 15x cable Ø
- Temperature range
- Cable structure
- SENSORFLEX®PVC
- Bare copper conductor, to
DIN VDE 0295 cl.5 or cl.6, fine wire
or extra fine wire, BS 6360 cl.5 or cl.6,
IEC 60228 cl.5 or cl.6 - Core insulation of PVC
- Core identification see table below
- Outer sheath of special PVC
SENSORFLEX®PUR
- Bare copper conductor, to
DIN VDE 0295 cl.6, extra fine wire,
BS 6360 cl.6, IEC 60228 cl.6 - Core insulation of PVC
- Core identification see table below
- Outer sheath of PUR
SENSORFLEX®PVC/PUR
- Construction as per SENSORFLEX® PVC
- PVC inner sheath, with PUR sheath applied
over it by means of coextrusion
- Bare copper conductor, to
- Properties
- SENSORFLEX®PVC
- Extensively oil resistant;
Chemical Resistance (see table
Technical Informations) - PVC self-extinguishing and flame retardant
acc. to DIN VDE 0482-332-1-2,
DIN EN 60332-1-2, IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method B)
SENSORFLEX®PUR
- low adhesion, extremely abrasion resistant,
resistant to hydrolysis and microbial attack
Special feature
- The cables with the highly flexible
stranded conductor, cl. 6, are
suitable for drag chain applications - These cables are produced to high
quality specifications and conform
with a yellow sheath to the
DESINA®-standard
Sheath colour yellow (RAL 1021) acc. to
DESINA® - Extensively oil resistant;
- Note
-
- All cables can be delivered with UL/CSA
approval and Cu shield. - DESINA®: Explanation: see introduction.
- All cables can be delivered with UL/CSA
- Application
- For decentralised installation and control technology. These cables are used in connector systems for sensors and actuators. In combination with injected circular connectors and installed actuator-sensor boxes, they constitute an important connecting element between the periphery and the PLC in production systems. The assembled cables offer attractive opportunities for reducing costs, not only in the field of automation technology, but also in the entire manufacturing industry. While previously it was necessary to carry out time-consuming wiring of switchgear cabinets and machines, now field bus technology has made it possible to move the periphery interfaces from the switchgear cabinets to the machines and systems. Moving the I/O points to the system periphery enables significant reductions in installation costs.
CE = Product conforms with Low-Voltage Directive 2014/35/EU. - Downloads
- Data sheet
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
