ADC KRONE (6830 1 810-01) Nhân mạng Cat6 STP/FTP RJ-45 Modular Jack, T568 A/B (Shielded) | Chính Hãng – Chống Nhiễu – Giá Tốt Nhất
TrueNet ®
Category 6 KM8® Shielded Jacks
TrueNet® Category 6 KM8® shielded jacks from ADC KRONE offer high performance and flexibility.
The KM8 jack adopts the keystone design, the global standard ensuring compatibility with the diverse
range of faceplates systems throughout the world. The cable manager holds cable pairs in place up to
the termination point. This prevents untwisting and buckling of the conductors thereby guaranteeing
performance for every installation.
TrueNet® Category 6 jacks are compliant with Category 6 standard at a component level and comes
complete with third party certification. Component compliance is the only way to guarantee true
performance. When used alongside TrueNet® Category 6 component compliant cables, panels and
cords complete infrastructure performance is guaranteed.
Features:
• Performance exceeding Category 6 specifications up to 250MHz
• KM8 cable managed jack in keystone format
• Fully interoperable and backwards compatible
• Third party certification at a component level
Key Benefits:
Maximum throughput, reliability and performance in your IT network
Flexibility to meet the most demanding installation requirements
Third party certification to offer complete peace of mind and guarantee quality
20 year performance warranty
Specifications
Technical Data
Electrical Data …………… KM8
Insulation resistance ……………..≥ 500MW
Dielectric strength ………………….Contact / shield 1.5kV
Current carrying capacity ………….≥ 1A
Typical plug /………………………. ≤ 20mW
jack contact resistance
Terminations
Typical IDC contact resistance ……………….≤ 1mW
Number of re-terminations …………………..≥ 30
Shield connection ………………………………Patented 360º shielding
Conductor diameter………………………… 0.5-0.65mm (AWG 24-22)
Insulation diameter…………………………. 0.7-1.6mm
Mechanical Data
Plug / jack mating cycles ………………….≥ 750 (IEC / EN 60603-7 series)
Plug / jack insertion / ………………………≤ 20N (IEC / EN 60603-7 series)
withdrawal force
Environmental
Operating temperature range ……………….-10º to +60ºC
Operating humidity range…………………….. ≤ 95% R.H. Non condensing
Testing requirements of connection technology according to ISO/IEC 11801 2nd
Edition, ANSI/TIA/EIA-568-C.2-1 and EN 50173-1:2002.
All connecting hardware is tested individually and as part of a channel to ensure critical parameters of Power summation, ACR, NEXT, ELFEXT and Return Loss exceed the requirements specified in international standards.
As there are infinite channel and permanent link combinations, to guarantee Category 6 system performance, the focus should be at a component level. Third party test certificates at a channel, permanent link and component level are available for all TrueNet Category 6 products.
DATA SHEET
