Cáp Điều Khiển Helukabel RE-2Y(St)Yv PiMF | Chính Hãng – Chống Nhiễu – Giá Tốt Nhất !!!

Technical data

• Special core insulation of PE
• Conductor resistance 
  0,5 mm²  max. 39,2 Ohm/km
  1,3 mm²  max. 14,2 Ohm/km
• Temperature range 
  flexing -5°C to +50°C
  fixed installation -40°C to +70°C
• Operating peak voltage max. 300 V
  (not for heavy current installation purposes)
• Test voltage 
  core/core 2000 V
  core/screen 1000 V
• Insulation resistance
  min. 5 GOhm x km
• Mutual capacitance  at 800 Hz
  core/core  0.5 mm²  approx. 75 pF/m
  core/core  1.3 mm²  approx. 100 pF/m
• Inductance 
  max. 0,75 mH/km
• Cross-talk attenuation 
  min. 1,02 dB/km at 60 kHz
• Minimum bending radius 
  7,5x cable Ø

Cable structure

• Bare copper stranded wires
  0,5 mm² = 7×0,3 mm
  1,3 mm² = 7×0,49 mm
• Core insulation of PE
• Cores coloured
  with number print 1/1, 2/2 etc.
  a-core = BK; b-core = WH
• Cores twisted in pairs with optimum pitch
• PiMF (pair in metal foil),
  PiMF structure: foil taping,
  Cu-tinned drain-wire 0,6 mm Ø,
  plastic coated alu-foil
  and foil wrapping
• PiMFe stranded in layer,
  1 communication core 0,5 mm²,
  PE-insulated orange (communication core
  for multicore version)
• Electrostatic screen (St) of plastics-coated
  metal foil and tinned drain-wire 0,5 mm²
  (7×0,3 mm)
• Outer sheath of PVC, reinforced,
  black (RAL 9005) or blue (RAL 5015)
• With meter marking
• Wall-thickness acc. to
  DIN VDE 0816-1, table 7, col.1

Properties

• The materials used during manufacturing
  are cadmium-free, contain no silicone
  and are free from substances harmful
  to the wetting properties of lacquers

Tests

• Self-extinguishing and flame retardant
  acc. to DIN VDE 0482-332-1-2 /
  DIN EN 60332-1-2 / IEC 60332-1-2

Note

• Cop.weight including communication core
  and drain-wire.
• Control cable with blue outer sheath, see
  Flexible Control Cables
• With blue outer sheath for hazardous areas
  to hazard type -i- for intrinsically safe
  installation acc. to DIN EN 60079-14
  section 12.2.2 (VDE 0165-1)
• AWG sizes are approximate equivalent
  values. The actual cross section is in mm².

Application

Instrumentation cables are used in data processing and process control. The individual screening of the pairs guarantee high cross-talk attenuation. The electrostatic screen protect the screened pairs against outer electrostatic interference fields. Low level of line attenuations and low mutual capacitances enable long transmission distances and fast pulse acceleration. Instrumentation cables are suitable for fixed installations in damp locations, in open spaces and for underground laying.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet 
Certificate of compliance