Cáp Điều Khiển Helukabel MULTISPEED® 500-C-TPE | Chính Hãng – Chống Nhiễu Lưới – Cáp Chuyển Động – Giá Tốt Nhất

MULTISPEED^® 500-C-TPE

safety against high bending in drag chain systems, low torsion, halogen-free, meter marking, EMC-preferred type

Technical data

• Special drag chain cables for high
  mechanical stress adapted to
  DIN VDE 0285-525-2-51 /
  DIN EN 50525-2-51
• Temperature range 
  flexing -30°C to +80°C
  fixed installation -40°C to +80°C
• Nominal voltage 
  U₀/U 300/500 V
• Test voltage 
  3000 V
• Insulation resistance
  min. 100 MOhm x km
• Minimum bending radius 
  flexing 5x cable Ø
  fixed installation 3x cable Ø
• Coupling resistance 
  max. 250 Ohm/km
• Radiation resistance 
  up to 100×10⁶ cJ/kg (up to 100 Mrad)

Cable structure

• Tinned copper conductor, fine wire,
  Unilay with short lay length
• Core insulation of special PP
• Core identification black cores with
  continuous white numbering
• GN-YE conductor, 3 cores and above
• Stranding:
  < 7 cores: cores stranded in a layer with
  optimal lay length around a filler as per
  construction
  ≥ 7 cores: cores stranded with optimal
  lay length to bunch-construction with
  low torsion strength, optimal selected
  short lay length around a filler
• Inner sheath of special-TPE , extruded as filler
  with pressure, natural colour
• Screen of Cu braid tinned,
  coverage 85% max., with optimal pitch
• Fleece separator, ensure good dismantling
  ability
• Outer sheath of special-TPE-O
  extruded as filler with pressure
• Sheath colour: ocean blue (RAL 5020)
• With meter marking
• TPE: The selected tinned copper wire
  conductor permits the installation in
  aggressive environments as well as hydrogen
  sulfide, ammonia and sulfur dioxide

Properties

• Microbe-resistance – TPE
• High property of alternating bending strength
• Long life durabilitys due to low
  friction-resistance
• High tensile strength, abrasion- and impact
  resistance at low temperature
• Low adhesion, oil resistence
• Tear resistance
• Better chemical resistance
• Ozone- and UV-resistant
• Reduced Ø, results low weight of moving
  materials
• The materials used during manufacturing
  are cadmium-free, contain no silicone
  and are free from substances harmful
  to the wetting properties of lacquers

Note

• G = with GN-YE conductor
  x = without GN-YE conductor (OZ)
• Please note “cleanroom qualified”
  when ordering.
• AWG sizes are approximate equivalent
  values. The actual cross section is in mm².
• Unscreened analogue type:
  MULTISPEED^® 500-TPE

Application

For permanent application in drag chains for long distances, high and low speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e. g. in energy drag chains. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet 
Certificate of compliance