Dây Cáp Helukabel NSSHÖU | Chính Hãng – Rubber Cable – Giá Tốt Nhất

NSSHÖU

heavy duty rubber cable 0,6/1 kV

Technical data

• Rubber sheath cable to
  DIN VDE 0250 part 812
• Temperature range 
  flexing -25°C to +80°C
  fixed installation -40°C to +80°C
• Permissible operating temperature 
  at conductor +90°C
• Nominal voltage 
  U₀/U 0,6/1 kV
• Max. permissible operating voltage
  – 3-Phase and single phase
  operation 700/1200 V
  – DC operation 900/1800 V
• Test voltage 3000 V
• Insulation resistance
  min. 20 MOhm x km
• Tensile strength
  statical load: total
  cross section x15 N/mm²
• Minimum bending radius 
  fixed installation 4x cable Ø
  flexing 10x cable Ø
  without forced operation 15x cable Ø

Cable structure

• Tinned copper conductor, to
  DIN VDE 0295 cl.5, fine wire,
  BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of rubber (EPR)
  compound type 3GI3 to
  DIN VDE 0207 part 20
• Core identification to DIN VDE 0293-308
  – up to 5 cores coloured
  – from 6 cores, black with continuous
  white numbering
• GN-YE conductor, 3 cores and above
• Cores stranded in layers with
  optimal lay length
• Inner sheath of rubber
  compound type GM1b to
  DIN VDE 0207 part 21
• Outer sheath of rubber
  compound type 5GM5 to
  DIN VDE 0207 part 21
• Sheath colour: yellow

Properties

• Ozone resistance
• High insulation resistance
• Resistant against hot penetration
• Low abrasion
• High notch resistant
• The code identification of a single core
  sheathed of an insulated wire is black.

Resistant against

• oils
• fats and chemicals

Tests

• Behaviour in fire acc. to
  DIN VDE 0482-332-1-2 /
  DIN EN 60332-1-2 / IEC 60332-1-2
• Oil resistant to DIN EN 60811-404

Note

• G = with GN-YE conductor
  x = without GN-YE conductor
• AWG sizes are approximate equivalent
  values. The actual cross section is in mm².

Application

Are suited as a connecting cable for very high mechanical stress in underground mining and tools for use in industries and outdoor use. They are also used for mining industry, surface mining, stone-pits, on building sites, outdoors as well as indoors. Suitable for fixed installation on plaster in dry, damp and wet areas. A long duration of life is guaranteed under extreme operating conditions. Not suitable for drumming and use in all types of machinery, such as robots, handling units and energy transfer units, where constant mobility is essential. The insulation of a plastic-rubber compound on EPR basis improves the resistance to ozone in order to avoid the formation of cracks due to ozone and insulation damages in switch-boards.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet