Đại Lý Bán Lẻ & Phân Phối Sản Phẩm ALANTEK Chính Hãng Tại Hà Nội-Hồ Chí Minh-Đà Nẵng Việt Nam Giá Tốt Nhất….

Liên Hệ Để Được Tư Vấn Và Có Giá Tốt Nhất….

Nguyễn Trung Đức

Phone: 0985 727 232      Skype: trungduc.0290

Email: duc.nguyen@ulcab.com.vn

Sản Phẩm Alantek Bao Gồm:

Giải Pháp Hệ Thống Mạng Alantek CAT 5E, CAT 6, CAT 6A

CAT 6A SOLUTIONS

• CAT 6A 4-Pair 23AWG F/UTP Cable

  

  Description

  Alantek Cat6A Twisted Pair Cable is designed to support high-bandwidth application up to 10Gigabit Ethernet. The cable is composed of 23 AWG bare solid copper conductors insulated with High Density Polyethylene (HDPE) insulation. The 4 twisted pairs are separated by a flexible PE separator, an additional layer of Aluminium foil covers the 4 pairs and is completed with an Outer Jacket.

  Part No.	Description	PDF
  301-6AFU08-L3GY	Cat 6A 4-pairs 23AWG F/UTP Shielded, LSZH, Grey – 305m/reel	Download PDF

• Category 6A Shielded Keystone Jack

  

  Description

  Alantek Cat 6A Jack is designed to provide superior performance and reliability. Its advance circuit design provides optimum signal quality, allowing it to exceed TIA/EIA, ISO (Category 6A) and 10 Gigabit Ethernet Performance standards.

  Part No.	Description	PDF
  302-2QX6AF-18AB	Cat 6A Shielded (Alloy) 180° Quick Crimp Keystone Jack	Download PDF
  302-1005W2-F103	8 Position Quick Crimp Tool (for QX series modular jack)	Download PDF

• Cat6A Shielded S/FTP 26A Molded Patch Cord

  

  Description

  Alantek Cat6A S/FTP Patch Cord is designed to assure high performance. The patch cable is terminated in factory with 8P8C, 50u” gold plated RJ45 Plug. All Patch Cords are 100% tested in the factory to ensure 10 Gigabit Ethernet performances.

  Part No.	Description	PDF
  302-4MSAxx-MLyy	xx meter, Cat 6A S/FTP shielded 4-Pairs Molded Patch Cords, LSZH	Download PDF
  Available colours (yy):	BL= Black , WH= White, RD= Red, GN= Green, BU= Blue, PR= Purple, OR= Orange, YL= Yellow, GY=Grey

• Modular Keystone Shielded Blank Patch Panel

  

  Part No.	Description	PDF
  302-201BF1-24BL	1U 24-Port Shielded Blank Patch Panel with label	Download PDF
  302-201BF1-48BL	U 48-Port Shielded Blank Patch Panel	Download PDF
  302-201BF2-72BL	2U 72-Port Shielded Blank Patch Panel
  302-2A1BF1-24BL	1U 24-Port Shielded Blank Angled Patch Panel	Download PDF
  302-2A1BF2-72BL	2U 72-Port Shielded Blank Angled Patch Panel

CAT 6 SOLUTIONS

• Category 6 4-Pair 23AWG Cable

  

  Description

  Alantek Cat6 Twisted Pair Cable is designed to support high-bandwidth application up to 10Gigabit* Ethernet. The cable is composed of 23 AWG bare solid copper conductors insulated with High Density Polyethylene (HDPE) insulation. For the unshielded cable, the 4 twisted pairs are separated by a flexible PE separator and the cable is completed with an Outer Jacket. For the shielded cable, an additional layer of Aluminum Foil covers the 4 twisted pairs.

  Part No.	Description	PDF
  301-6008LG-03GY	Cat 6 4-Pair 23AWG U/UTP Unshielded Cable, PVC, Grey – 305m/reel	Download PDF
  301-6008LG-03BU	Cat 6 4-Pair 23AWG U/UTP Unshielded Cable, PVC, Blue – 305m/reel	Download PDF
  301-60F8LG-03GY	Cat 6 4-Pair 23AWG F/UTP Shielded Cable, PVC, Grey – 305m/reel	Download PDF
  301-6S0F08-03GY	Cat 6 4-Pair 23AWG S/FTP Shielded Cable, PVC, Grey – 305m/reel	Download PDF
  301-6SFU08-03GY	Cat 6 4-Pair 23AWG SF/UTP Shielded Cable, PVC, Grey – 305m/reel	Download PDF
  -xyzz	x : L = LSZH, 0 = PVC, P = PE. y : 3 = 305m/Box, 5 = 500 m/reel. zz : colour (upon request)

• Category 6 Keystone Jack

  

  Description

  Alantek Cat6 Slim Line 180° Quick Crimp Keystone Jack are designed to provide superior performance, reliability and fast termination. It advanced circuit design provide optimum signal quality, allowing it to exceed TIA/EIA and ISO Category 6 performance standards. The Slim design offers a smaller footprint maximizing space in confined area.

  A Shielded (Alloy) 180° Degree Dual IDC Quick Crimp Keystone Jack is also available for shielded application

  Part No.	Description	PDF
  302-2QX618-WHAB	Cat 6 Unshielded 180° Quick Crimp Keystone Jack	Download PDF
  302-2QX6F1-18AB	Cat 6 Shielded 180° Quick Crimp Keystone Jack	Download PDF
  302-1005W2-F103	8 Position Quick Crimp Tool (for QX series Modular Jack)	Download PDF

• Category 6 Patch Panel

  

  Description

  Alantek Cat6 Unshielded Patch Panel is a rack mountable 24 ports RJ45 jack panel. The Dual IDC connection on the rear of the panel support two type of termination. The front of the panel has transparent plastic holders for the port identification labels. For better patch cord management, a management panel is attached to the front of the panel.

  Shielded Cat 6 Dual IDC patch panel is available for environment that has high Electromagnetic Interference. The Shielded Cat 6 panel has Silk screen labels at the front.

  For more Shielded panel solutions, please refer to the modular blank panel from Cat6A series

  Part No.	Description	PDF
  302-201601-24AB	1U Cat 6 24-port Unshielded Dual IDC Patch Panel c/w Front Cable Management	Download PDF
  302-2A1601-24AB	1U Cat 6 24-port Unshielded Dual IDC Angled Patch Panel
  302-201601-48AB	1U Cat 6 48-port Unshielded Dual IDC Patch Panel	Download PDF
  302-201BLN-24BL	1U 24-port Unshielded Blank Patch Panel	Download PDF
  302-2016F1-2400	1U Cat 6 24-port Shielded Dual IDC Patch Panel

CAT 5E SOLUTIONS

• Category 5E Cable

  

  Description

  Alantek Cat5E Twisted Pair Cable is designed to support high-bandwidth application up to 1 Gigabit Ethernet. The cable is composed of 24 AWG bare solid copper conductors insulated with High Density Polyethylene (HDPE) insulation. For the unshielded cable, the insulated conductors are twisted into pairs and complete with an Outer Jacket. For the shielded cable, an additional layer of Aluminium laminated foil covers the 4 pairs of insulated conductor.

  Part No.	Description	PDF
  301-10002E-03GY	Cat 5E 2-pair 24AWG U/UTP Unshielded Cable, PVC, Grey – 305m/box	Download PDF
  301-10008E-03GY	Cat 5E 4-pair 24AWG U/UTP Unshielded Cable, PVC, Grey – 305m/box	Download PDF
  301-10008E-05GY	Cat 5E 4-pair 24AWG U/UTP Unshielded Cable, PVC, Grey – 500m/reel	Download PDF
  301-10008E-10GY	Cat 5E 4-pair 24AWG U/UTP Unshielded Cable, PVC, Grey – 1000m/reel	Download PDF
  301-10F02E-03GY	Cat 5E 2-pair 24AWG F/UTP Shielded Cable, PVC, 305m/reel
  301-10F08E-03GY	Cat 5E 4-pair 24AWG F/UTP Shielded Cable, PVC, 305m/reel	Download PDF
  -xyzz	x : L=LSZH, 0=PVC, P=PE y : 3= 305m/Box, 5=500m/reel, 1=1000m/reel zz : colour (upon request)

• Category 5E Keystone Jack

  

  Description

  Alantek Cat5e Slim Line 180° Dual IDC Keystone Jack is designed to provide superior performance and reliability. Its advanced circuit design provide optimum signal quality allowing it to exceed TIA/EIA and ISO Category 5E performance standards. The Slim design offer a smaller footprint maximizing space in confined area.

  A 180° Shielded Dual IDC Jack is available for shielded application.

  Part No.	Description	PDF
  302-202018-WHAB	Cat 5e Unshielded Slim Line 180° Dual IDC Keystone Jack	Download PDF
  302-2TL018-WHAB	Cat 5e Unshielded Toolless Keystone Jack
  302-202F01-18AB	Cat 5e Shielded 180° Dual IDC Keystone Jack

• Category 5E Patch Panel

  

  Description

  Alantek Cat5E Unshielded Patch Panel is a rack mountable RJ45 jack panel. The 1U type has 24 RJ45 ports and the 2U type has 48 RJ45 ports. The Dual IDC connection on the rear of the panel support two type of termination. The front of the panel has transparent plastic holders for the port identification labels.

  Part No.	Description	PDF
  302-201001-2400	1U 24-Port Cat 5E Unshielded Dual IDC Patch Panel with Label	Download PDF
  302-201002-4800	2U 48-Port Cat 5E Unshielded Dual IDC Patch Panel with Label	Download PDF
  302-201001-4800	1U 48-Port Cat 5E Unshielded Dual IDC Patch Panel	Download PDF
  302-201BLN-24BL	1U 24-port Unshielded Blank Patch Panel	Download PDF
  302-201101-2400	1U 24-port Cat 5E Shielded Dual IDC Patch Panel

CAT5E AND CAT6 STRANDED PATCH CORD

• Cat5e and Cat6 Stranded Patch Cord

  

  Description

  Alantek Patch Cord is designed to assure high performance over longer distances. The patch cable is composed of 4-pairs, Stranded Conductors and an outer PVC Jacket. The patch cable is terminated in factory with 8P8C, 50u” gold plated RJ45 Plugs. A Molded Boot provides strain relief for the patch cable. All Patch Cords are 100% tested in the factory to ensure Gigabit performance.

  •     Stranded Copper Conductors
  •     Comes in various colours
  •     100% Factory Terminated
  •     100% Factory Tested

  

  Part No.	Description	PDF
  302-4MUxx6-FTyy	Cat 6 U/UTP Patch Cord, molded boot, PVC, xx ft	Download PDF
  302-4MFxx6-FLyy	Cat 6 F/UTP Patch Cord, molded boot, LSZH, , xx ft	Download PDF
  302-4MUxxE-FTyy	Cat 5E U/UTP Patch Cord, molded boot, PVC, xx ft	Download PDF
  302-4MFxxE-FTyy	Cat 5E F/UTP Patch Cord, molded boot, PVC, xx ft	Download PDF

Thanh Quản Lý Cáp Ngang Alantek

CABLE MANAGEMENT PANEL

• Cable Management Panel

  

  Description

  Alantek cable management panel is a made of extruded aluminum, thus is strong, light and do not warp under stress. The metallic structure improve EMC and performance of the cables.

  Part No.	Description	PDF
  302-201ACM-1UBL	1U Aluminum Cable Management Panel with Front Cover	Download PDF
  302-201ACM-2UBL	2U Aluminum Cable Management Panel with Front Cover

Hạt Mạng, Thoại CAT 3, CAT 5E, CAT 6, CAT 6A

IN-LINE COUPLER, PLUG & BOOT

• Keystone in-line coupler

  

  Description

  Alantek In-Line coupler are designed to provide superior performance, reliability and fast connection. It’s advanced circuit design provide optimum signal quality, allowing it to exceed TIA/EIA and ISO performance standards.

  Part No.	Description	PDF
  302-2026AF-CPAB	Cat 6A Shielded In-Line Keystone Coupler	Download PDF
  302-202618-CPAB	Cat 6 Unshielded In-Line Keystone Coupler
  302-2026F1-CPAB	Cat 6 Shielded In-Line Keystone Coupler	Download PDF

• PLUG AND BOOTS

  

  Description

  Alantek Cat 6A, 6, plugs is designed with gold plating on contacts suitable for termination on 23 AWG to 24 AWG solid and stranded cables. Colour boots are available to provide identification and strain relief.

   

  Note : Plugs termination do not qualify for Alantek 25years warranty program.

  Part No.	Description	PDF
  302-203FA6-1550	Cat 6A Shielded RJ45 Plug 8P8C 1.5mm 50µm	Download PDF
  302-203F06-1250	Cat 6 Shielded RJ45 Plug 8P8C 1.2mm 50µm	Download PDF
  302-09110T-75xx	7.5mm RJ45 Rubber Boot, xx (for 1.2-1.5)	Download PDF
  302-203006-0050	Cat 6 RJ45 Plug 8P8C 50µm	Download PDF
  302-20300E-0050	Cat 5e RJ45 Plug 8P8C 50µm	Download PDF
  302-203F0E-0050	Cat 5e Shielded RJ45 Plug 8P8C 50µm
  302-091100-00xx	RJ45 Rubber Boot (0.55-0.65mm), xx	Download PDF
  302-203003-0003	Cat3 RJ11 Plug, 6P4C
  Substitute : xx with	BL=Black, WH=White, RD=Red, YL=Yellow, BU=Blue, GN=Green, PK=Pink, PR=Purple,vOR=Orange, TN=Tan(grey)

Mặt và Hộp 1, 2, 4, 6 Port Alantek

FACE PLATE & SURFACE MOUNT BOX

• Surface Mount Box

  

  Surface Mount Box are available from 1-port to 6-port.

  Part No.	Description	PDF
  302-SMB001-SHWH	1-port Shuttered Surface Mount Box, White	Download PDF
  302-SMB002-SHWH	2-port Shuttered Surface Mount Box, White	Download PDF
  302-SMB004-SHWH	4-port Shuttered Surface Mount Box, White	Download PDF
  302-SMB006-SHWH	6-port Shuttered Surface Mount Box, White	Download PDF

• Face Plate

  

  Description

  Alantek flush mount Face Plates is available in UK or US style. The Angle Face Plate is available in UK style only.

  Part No.	Description	PDF
  302-203201-00WH	1-port US Style Face Plate, White
  302-203202-00WH	2-port US Style Face Plate, White	Download PDF
  302-203204-00WH	4-port US Style Face Plate, White	Download PDF
  302-203206-00WH	6-port US Style Face Plate, White
  302-203201-SHWH	1-port US Style Shuttered Face Plate, White
  302-203202-SHWH	2-port US Style Shuttered Face Plate, White
  302-203204-SHWH	4-port US Style Shuttered Face Plate, White
  302-203INS-00WH	Blank Insert for US Style Face Plate, White
  302-2B3221-SHWH	1-port UK Style Shuttered Face Plate, White	Download PDF
  302-2B3222-SHWH	2-port UK Style Shuttered Face Plate, White	Download PDF
  302-2B3224-SHWH	4-port UK Style Shuttered Face Plate, White
  302-2BA221-SHWH	1-port UK Style Angle Shuttered Face Plate, White	Download PDF
  302-2BA222-SHWH	2-port UK Style Angle Shuttered Face Plate, White	Download PDF
  302-2BA224-SHWH	4-port(2 Gang) UK Style Angle Shuttered Face Plate, White	Download PDF

Cáp Thoại Và Mạng Nhiều Pair CAT 3, CAT 5, CAT 5E Alantek

MULTIPAIR COPPER TABLE

• Multi-Pair Unshielded Copper Cable

  

  Description

  Alantek Multipair cable is composed of 24 AWG solid copper conductors insulated with colour coded High Density Polyethylene (HDPE).The cable is completed with a PVC Jacket. It is available in 2-pairs, 5-pairs, multiple of 10-pairs and 25-pairs.

  Part No.	Description	PDF
  301-10025E-05GY	Cat 5e Unshielded Twisted Pair, 25-pairs Solid Cable, PVC, Grey – 500m
  301-10050E-05GY	Cat 5e Unshielded Twisted Pair, 50-pairs Solid Cable, PVC, Grey – 500m
  301-100255-05GY	Cat 5 Unshielded Twisted Pair, 25-pairs Solid Cable, PVC, Grey – 500m
  301-100505-05GY	Cat 5 Unshielded Twisted Pair, 50-pairs Solid Cable, PVC, Grey – 500m
  301-101005-05GY	Cat 5 Unshielded Twisted Pair, 100-pairs Solid Cable, PVC, Grey – 500m
  301-100023-05GY	Cat 3 Unshielded Twisted Pair, 2-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100043-05GY	Cat 3 Unshielded Twisted Pair, 4-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100053-05GY	Cat 3 Unshielded Twisted Pair, 5-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100103-05GY	Cat 3 Unshielded Twisted Pair, 10-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100203-05GY	Cat 3 Unshielded Twisted Pair, 20-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100253-05GY	Cat 3 Unshielded Twisted Pair, 25-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100303-05GY	Cat 3 Unshielded Twisted Pair, 30-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100503-05GY	Cat 3 Unshielded Twisted Pair, 50-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-100803-05GY	Cat 3 Unshielded Twisted Pair, 80-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  301-101003-05GY	Cat 3 Unshielded Twisted Pair, 100-pairs Solid Cable, Voice Grade, PVC, Grey – 500m	Download PDF
  -xyzz	x : L=LSZH, 0=PVC, P=PE y : 3= 305m/Box, 5=500m/reel, 1=1000m/reel zz : colour (upon request)

Dung Cụ Thi Công & Phiến Thoại ALANTEK

WIRING ACCESSORIES & TOOLS

• 110 Wiring block and Accessories

  

  Description

  Alantek Wiring Block is a fire retardant molded plastic block with 110 connection. The blocks can accommodate 22AWG to 26AWG wires and can be mounted directly on wall surfaces. There are two types of Wiring Blocks. One comes with legs to provide space behind the block for routing the incoming cables. The other is built without legs and is used where depth is restrictive.

  Part No.	Description
  302-3110FT-L050	50-pairs, Cat3 110 Block with Legs. Including connecting blocks, labels and holders. (5-pair block)
  302-3110FT-L100	100-pairs, Cat3 110 Block with Legs. Including connecting blocks, labels and holders. (5-pair block)
  302-3110FT-0050	50-pairs, Cat3 110 Block. Including connecting blocks, labels and holders. (5-pair block)
  302-3110FT-0100	100-pairs, Cat3 110 Block. Including connecting blocks, labels and holders. (5-pair block)
  302-3110RN-0100	100-pairs, Cat3 1U Rack Mount 110 Block. Including connecting blocks, labels and holders. (5-pair block)
  302-311LCH-0000	Label and transparent holder
  302-311LR4-0000	4-pairs 110 Connecting Block
  302-311LR5-0000	5-pairs 110 Connecting Block
  301-XC051P-BUYL	1-pair Cross-Connect Solid Copper Wire (Blue/Yellow)
  301-XC052P-BUOR	2-pair Cross-Connect Solid Copper Wire (Blue/White, Orange/White)

• MISCELLANEOUS TOOLS

  

  Part No.	Description	PDF
  302-1005W2-F103	8 Position Quick Crimp Tool (for QX series Modular Jack)
  302-094591-0000	Shielded Plug Crimper (for 1.2-1.5mm O.D. wire)
  302-092R45-R000	Modular Crimp Tool For RJ45/RJ11 Plug, Ratchet Type
  302-092132-0110	1-pair 110 Impact Tool with Hook & Spudger
  302-09200A-0066	S66 Blade for 1-pair Impact Tool
  302-09200B-0000	110 Blade for 1-pair Impact Tool
  302-092315-0100	5-Pair 110 Impact Tool with Blade
  302-09200D-0000	Disposable Impact Tool with round cable cutter
  302-251451-0000	Continuity Wire Map Tester for UTP/FTP and BNC	Download PDF

Cáp Mạng Ngoài Trời Alantek CAT 5E, CAT 6

OUTDOOR CATEGORY CABLE

• Outdoor Category Cable

  

  Description

  Alantek Outdoor Category 5e/6 Cable are designed to support high-bandwidth application in harsh environment whereby water is a constant factor. Each cable is gel-filled or double-jacket to ensure zero water penetration. The polyethylene (PE) Jacket is UV resistant, suitable for installation whereby the cable is expose to sunlight.

  Part No.	Description	PDF
  301-1J008E-P3BL	Outdoor Gel-Filled Cat 5E Unshielded Twisted Pair, 4-pairs Solid Cable, PE, Black – 305m/reel
  301-10F08E-P3BL-D000	Outdoor Double Jacket Cat 5E Shielded Twisted Pair, 4-pairs Solid Cable, PE, Black – 305m/reel
  301-6J08LG-P3BL	Outdoor Gel-Filled Cat 6 Unshielded Twisted Pair, 4-pairs Solid Cable, PE, Black – 305m/reel	Download PDF
  301-60F08E-P3BL-D000	Outdoor Double Jacket Cat 6 Shielded Twisted Pair, 4-pairs Solid Cable, PE, Black – 305m/reel	Download PDF
  -xyzz	x : L=LSZH, 0=PVC, P=PE y : 3= 305m/Box, 5=500m/reel, 1=1000m/reel zz : colour (upon request)

Giải Pháp Hệ Thống Mạng Cáp Quang ALANTEK

Cáp Quang Trong Nhà Alantek

FIBER OPTIC CORDAGE

• Fiber Cordage

  

  Description

  The fiber, either single mode or multimode type, are 900µm tight buffered fiber. A layer of Aramid yarn is applied around the tight buffer fiber as strength member. The Simplex cordage is completed with a PVC Jacket while the Duplex cordage is completed with a figure-8 PVC jacket.

  Other diameter can be requested

  Part No.	Description	PDF
  306-772001-a0yy	SM 9/125µm Simplex Single Mode Fiber Optic Cordage, Yellow	Download PDF
  4XG-552001-a0yy	OM4 50/125µm Simplex Multimode Fiber Optic Cordage, Violet	Download PDF
  3XG-552001-a0yy	OM3 50/125µm Simplex Multimode Fiber Optic Cordage, Aqua	Download PDF
  306-552001-a0yy	OM2 50/125µm Simplex Multimode Fiber Optic Cordage, Orange	Download PDF
  306-662001-a0yy	OM1 62.5/125µm Simplex Multimode Fiber Optic Cordage, Orange	Download PDF
  306-772002-a0yy	SM 9/125µm Duplex SingleMode Fiber Optic Cordage, Yellow	Download PDF
  4XG-552002-a0yy	OM4 50/125µm Duplex Multimode Fiber Optic Cordage, Violet	Download PDF
  3XG-552002-a0yy	OM3 50/125µm Duplex Multimode Fiber Optic Cordage, Aqua	Download PDF
  306-552002-a0yy	OM2 50/125µm Duplex Multimode Fiber Optic Cordage, Orange	Download PDF
  306-662002-a0yy	OM1 62.5/125µm Duplex Multimode Fiber Optic Cordage, Orange	Download PDF
  Substitute :	yy = 16(Ø1.6mm), 20(Ø2.0mm), 28(Ø2.8mm)
  -a000	a = production code, subjected to change upon shipping

INDOOR DISTRIBUTION FIBER OPTIC CABLE

• Indoor Distribution Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are 900µm Tight buffer fiber. A layer of Aramid yarn is applied around the tight buffer fiber as strength member. The cable is completed with a PVC Jacket (OFNR).

  Part No.	Description	PDF
  306-7730xx-a000	SM 9/125µm Single Mode Indoor Distribution Fiber Optic Cable, Yellow	Download PDF
  4XG-5530xx-a000	OM4 50/125µm Multimode Indoor Distribution Fiber Optic Cable, Violet	Download PDF
  3XG-5530xx-a000	OM3 50/125µm Multimode Indoor Distribution Fiber Optic Cable, Aqua	Download PDF
  306-5530xx-a000	OM2 50/125µm Multimode Indoor Distribution Fiber Optic Cable, Orange	Download PDF
  306-6630xx-a000	OM1 62.5/125µm Multimode Indoor Distribution Fiber Optic Cable, Orange	Download PDF
  Substitute :	xx = Number of fiber core	Download PDF
  -a000	a = production code, subjected to change upon shipping

• Indoor Multi-unit Distribution Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are positioned in a sub-unit jacket, containing Aramid yarn and 6/12 fiber. This multi-unit design allow sub-unit to be routed to different area/panel, ease termination and connection. A Fiber Reinforced Plastic (FRP) locates in the center of the core as a non-metallic strength member. Sub-unit are stranded around the strength member into a compact and circular cable core, thus achieving 36 -144 fiber. Each fiber is mechanically reinforced with two successive sheaths of 400µm and 900µm which enables direct termination of connectors.

  Part No.	Description	PDF
  306-7MTxxx-a000	SM 9/125µm Single Mode Multi-Tube Indoor Distribution, PVC Jacket, Yellow	Download PDF
  4XG-5MTxxx-a000	OM4 50/125µm Multimode Multi-Tube Indoor Distribution, PVC Jacket, Violet	Download PDF
  3XG-5MTxxx-a000	OM3 50/125µm Multimode Multi-Tube Indoor Distribution, PVC Jacket, Aqua	Download PDF
  306-5MTxxx-a000	OM2 50/125µm Multimode Multi-Tube Indoor Distribution, PVC Jacket, Orange	Download PDF
  306-6MTxxx-a000	OM1 62.5/125µm Multimode Multi-Tube Indoor Distribution, PVC Jacket, Orange	Download PDF
  Substitute :	xxx = Number of fiber core
  -a000	a = production code, subjected to change upon shipping

Cáp Quang Trong Nhà Và Ngoài Trời ALANTEK

INDOOR/OUTDOOR NON-METALLIC FIBER OPTIC CABLE

• Indoor/Outdoor Non-Metallic Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the centre of the core as a non-metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with filling compound and completed with overall Polyethylene (PE) or Fire Retardant LSZH sheath.

  • Available in LSZH Jacket

  Part No.	Description	PDF
  306-NMS7xx-a000	For fiber below 96 core
  306-NMS712-a000	12core 9/125 µm Single Mode Indoor/Outdoor Non-Metallic Fiber Optic Cable	Download PDF
  06-NMS700-a000-0xxx	For fiber above 100 core
  306-NMS700-a000-0144	144core 9/125 µm Single Mode Indoor/Outdoor Non-Metallic Fiber Optic Cable	Download PDF
  Substitute	xx : Number of fiber core
  Substitute	306-NMS7, with 4XG-NMS5 for OM4, 3XG-NMS5 for OM3, 306-NMS5 for OM2, 306-NMS6 for OM1
  -a000	a = production code, subjected to change upon shipping

• Indoor/Outdoor Non-Metallic Double Jacklet Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of the core as a non- metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with filling compound and covered with a thin layer of Polyethylene (PE) inner sheath. A layer of Aramid yarn is applied around the cable core as additional strength member. The cable is completed with a Polyethylene (PE) or Fire Retardant LSZH sheath.

  • Available in LSZH Jacket

  Part No.	Description	PDF
  306-NMA7xx-a000	For fiber below 96 core
  306-NMA712-a000	12core 9/125 µm Single Mode Indoor/Outdoor Non-Metallic Double Jacket Fiber Optic Cable	Download PDF
  306-NMA700-a000-0xxx	For fiber above 100 core
  306-NMA700-a000-0144	144core 9/125 µm Single Mode Indoor/Outdoor Non-Metallic Double Jacket Fiber Optic Cable	Download PDF
  Substitute	xx : Number of fiber core
  Substitute	306-NMA7, with 4XG-NMA5 for OM4, 3XG-NMA5 for OM3, 306-NMA5 for OM2, 306-NMA6 for OM1
  -a000	a = production code, subjected to change upon shipping

OUTDOOR STEEL ARMOURED FIBER OPTIC CABLE

• Outdoor Steel Armoured Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of the core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. A corrugated steel tape armour(CST) is longitudinally applied over the cable core. The cable core is filled with filling compound to protect it from water. The cable is completed with a Polyethylene (PE) sheath.

  Available in LSZH Jacket and FRP Center Member

  Part No.	Description	PDF
  306-STA7xx-a000	For fiber below 96 core
  306-STA712-a000	12core 9/125µm Single mode Outdoor CST Armoured Fiber Optic Cable	Download PDF
  306-STA700-a000-0xxx	For fiber above 100 core
  306-STA700-a000-0144	144core 9/125µm Single mode Outdoor CST Armoured Fiber Optic Cable	Download PDF
  Substitute	xx : Number of fiber core
  Substitute	306-STA7, with 4XG-STA5 for OM4, 3XG-STA5 for OM3, 306-STA5 for OM2, 306-STA6 for OM1
  -a000	a = production code, subjected to change upon shipping

• Outdoor Steel Armoured Figure-8 Aerial Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. A corrugated steel tape armour(CST) is applied longitudinally over the cable core, with is filled with filling compound to protect from water. The cable accompanied with Stranded Wires as the supporting element, completed with a Polyethylene (PE) sheath to form a figure-8 structure.

  Available in LSZH Jacket and FRP Center member

  Part No.	Description
  306-F8A7xx-aM12	For fiber below 96 core
  306-F8A712-aM12	12core 9/125µm Single mode Figure-8 Armoured Fiber Optic Cable
  Substitute	xx : Number of fiber core
  Substitute	306-F8A7, with 4XG-F8A5 for OM4, 3XG-F8A5 for OM3, 306-F8A5 for OM2, 306-F8A6 for OM1
  -a000	a = production code, subjected to change upon shipping

OUTDOOR DOUBLE JACKET STEEL ARMOURED FIBER OPTIC CABLE

• Outdoor Double Jacket Steel Armoured Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A fibre-reinforced plastic (FRP), sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of the core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core, enclosed by an inner polyethylene (PE) jacket. The cable core is filled with filling compound to protect it from water. A corrugated steel tape armour(CST) is longitudinally applied over the inner jacket. The cable is completed with a Polyethylene (PE) sheath.

  Double armoured version can be achieved by adding a layer of aluminium tape armour before the inner jacket.

  Available in LSZH Jacket and Steel Center member

  Part No.	Description
  306-STA7xx-a000-DSF0	For fiber below 96 core
  306-STA712-a000-DSF0	12core 9/125 Singlemode Outdoor Double Jacket Steel Armoured Fiber Optic Cable
  306- STA700-a000-0xxx-DSF0	For fiber above 100 core
  306-STA700-a000-0144-DSF0	144core 9/125 Singlemode Outdoor Double Jacket Steel Armoured Fiber Optic Cable
  306-STA7xx-a000-DDF0	For fiber below 96 core
  306-STA712-a000-DDF0	12core 9/125 Singlemode Outdoor Double Jacket Double Armoured Fiber Optic Cable
  306- STA700-a000-0xxx-DDF0	For fiber above 100 core
  306-STA700-a000-0144-DDF0	144core 9/125 Singlemode Outdoor Double Jacket Double Armoured Fiber Optic Cable
  Substitute	xx : Number of fiber core
  Substitute	306-STA7, with 4XG-STA5 for OM4, 3XG-STA5 for OM3, 306-STA5 for OM2, 306-STA6 for OM1
  -a000	a = production code, subjected to change upon shipping

• Outdoor Double Jacket Steel Armoured Figure 8 Aerial Fiber Optic Cable

  

  Description

  The fiber, either single mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A fibre-reinforced plastic (FRP), sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of the core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core, enclosed by an inner polyethylene (PE) jacket. The cable core is filled with filling compound to protect it from water. A corrugated steel tape armour(CST) is longitudinally applied over the inner jacket. The cable is completed with a Polyethylene (PE) sheath.

  Double armoured version can be achieved by adding a layer of aluminium tape armour before the inner jacket.

  Available in LSZH Jacket and Steel Center member

  Part No.	Description
  306-F8A7xx-aM08-DSF0	For fiber below 96 core
  306-F8A712-aM08-DSF0	12core 9/125 Singlemode Double Jacket Steel Armoured Figure-8 Aerial Fiber Optic Cable
  306-F8A700-aM12-0xxx-DSF0	For fiber above 100 core
  306-F8A700-aM12-0144-DFS0	144core 9/125 Singlemode Double Jacket Steel Armoured Figure-8 Aerial Fiber Optic Cable
  306-F8A7xx-aM08-DDF0	For fiber below 96 core
  306-F8A712-aM08-DDF0	12core 9/125 Singlemode Double Jacket Double Armoured Figure-8 Aerial Fiber Optic Cable
  306-F8A700-aM12-0xxx-DDF0	For fiber above 100 core
  306-F8A700-aM12-0144-DDF0	144core 9/125 Singlemode Double Jacket Double Armoured Figure-8 Aerial Fiber Optic Cable
  Substitute	xx : Number of fiber core
  Substitute	306-STA7, with 4XG-STA5 for OM4, 3XG-STA5 for OM3, 306-STA5 for OM2, 306-STA6 for OM1
  -a000	a = production code, subjected to change upon shipping

FIBER OPTIC DISTRIBUTION PANEL

• Fiber Optic Distribution Panel (8R series)

  

  Description

  Alantek Fiber Optic Distribution Panels are available with various designs. The 19” Rack Mountable Panels come in 1U or 2U in height. The Wall Mount Boxes are compact in size. These panels are suitable for direct termination and/or splicing of fiber optic cables. Accessories include splice trays, splice sleeves, cable glands and wire management.

  The 1U Rack Mount Panel and the Wall Mount Box can terminate up to 24 fibers for ST, SC or FC connectors or 48 fibers with LC connectors. The high density 2U Rack Mount Panel can terminate up to 48 fibers with ST, SC or FC connectors or 96 fibers with LC connectors. Angled adaptor plates are also available for better patch cord management.

  Part No.	Description	PDF
  306-8R1UBN-0000	1U 19” Rack Mount Blank Fiber Optic Panel with Splice Tray, Splice Sleeve & Wire Management (2 plate slot)	Download PDF
  306-8R2UBN-0000	2U 19” Rack Mount Blank Fiber Optic Panel with Splice Tray, Splice Sleeve & Wire Management (4 plate slot)	Download PDF
  306-8R4U12-0000	4U 19” Rack Mount Blank Fiber Optic Panel with Splice Tray, Splice Sleeve & Wire Management (12 plate slot)	Download PDF
  306-8WSBLN-0000	Wall Mount Blank Fiber Optic Box with Splice Tray, Splice Sleeve & Wire Management (2 plate slot)	Download PDF
  306-8WMBLN-0000	Wall Mount Blank Fiber Optic Box with Splice Tray, Splice Sleeve & Wire Management (4 plate slot)	Download PDF
  306-8WLBLN-0000	Wall Mount Blank Fiber Optic Box with Splice Tray, Splice Sleeve & Wire Management (8 plate slot)	Download PDF
  306-8P0000-0000	Blank Adaptor Plate	Download PDF
  306-8S0106-xx00	ST Adaptors with Plate, Flush Mount, 6-fiber	Download PDF
  306-8S0112-xx00	ST Adaptors with Plate, Flush Mount, 12-fiber	Download PDF
  306-8SA112-xx00	ST Adaptor with Plate, Angle Mount, 12-fiber	Download PDF
  306-8S0306-xx00	FC Adaptors with Plate, Flush Mount, 6-fiber	Download PDF
  306-8S0312-xx00	FC Adaptors with Plate, Flush Mount, 12-fiber	Download PDF
  306-8SA312-xx00	FC Adaptor with Plate, Angle Mount, 12-fiber	Download PDF
  306-8S0206-xx00	SC Simplex Adaptor with Plate, Flush Mount, 6-fiber	Download PDF
  306-8S0212-xx00	SC Simplex Adaptor with Plate, Flush Mount, 12-fiber	Download PDF
  306-8D0212-xx00	SC Duplex (6) Adaptor with Plate, Flush Mount, 12-fiber	Download PDF
  306-8SA206-xx00	SC Simplex Adaptor with Plate, Angle Mount, 6-fiber	Download PDF
  306-8SA212-xx00	SC Simplex Adaptor with Plate, Angle Mount, 12-fiber	Download PDF
  306-8DA212-xx00	SC Duplex (6) Adaptor with Plate, Angle Mount, 12-fiber	Download PDF
  306-8D0712-xx00	LC Duplex (6) Adaptor with Plate, Flush Mount, 12-fiber	Download PDF
  306-8Q0724-xx00	LC Quad (6) Adaptor with Plate, Flush Mount, 24-fiber	Download PDF
  306-8DA712-xx00	LC Duplex (6) Adaptor with Plate, Angle Mount, 12-fiber	Download PDF
  306-9RST24-0000	24core Fiber Optic Splice Tray for Rack Mount Panel (for 1U and 2U only)	Download PDF
  306-8RST12-0000	12core Fiber Optic Splice Tray for Wall Mount Panel	Download PDF
  Subsitute	xx = SM (Singlemode), MM (Multimode)

• Fiber Optic Distribution Panel (9R series) – High Density

  

  Description

  This latest Fiber Optic Distribution Panel can accommodate 4 adapter plates in 1U and terminate/splice from 12 to 48 fibers, in various types of connectors. Accessories include splice trays, splice sleeves, cable gland and wire management.

  – Sliding 1U patch panel with defined stop for the drawer

  Part No.	Description	PDF
  306-9R1U4P-0000	1U 19″ Rack Mount Blank Fiber Optic Patch Panel with Splice Tray(2), (4 Plate Slot)	Download PDF
  306-9R1U4P-0600	1U 19″ Rack Mount Blank Fiber Optic Patch Panel with Splice Tray(2), (4 Plate Slot with 6 cable gland input)	Download PDF
  306-9R1U4P-06E0	1U 19″ Rack Mount Blank Fiber Optic Patch Panel (4 Plate Slot with 6 cable gland input)(no splice tray)	Download PDF
  306-9RST24-0000	24core Fiber Optic Splice Tray for 9R Rack Mount Panel	Download PDF
  306-9RST24-2460	24 core Fiber Optic Splice Tray with 24pcs of 3.0mm fusion splice sleeve, 60mm
  306-9P0000-0000	Blank Adaptor Plate	Download PDF
  3xx-9Sy208-zz00	SC Simplex (8) Adaptor with Plate, 8 fiber	Download PDF
  3xx-9Sy212-zz00	SC Simplex (12) Adaptor with Plate, 12 fiber	Download PDF
  3xx-9Dy212-zz00	SC Duplex (6) Adaptor with Plate, 12 fiber	Download PDF
  3xx-9Dy712-zz00	LC Duplex (6) Adaptor with Plate, 12 fiber	Download PDF
  3xx-9Dy716-zz00	LC Duplex (8) Adaptor with Plate, 16 fiber	Download PDF
  3xx-9Dy724-zz00	LC Quad (6) Adaptor with Plate, 24 fiber	Download PDF
  3xx-9S0112-zz00	ST Adaptors with Plate, 12 fiber	Download PDF
  3xx-9S0312-zz00	FC (D type) Adaptors with Plate, 12 fiber	Download PDF
  Substitute : xx	06 = SM, OM1, OM2. XG = OM3
  Substitute : y	0 = normal adapter. 1 = APC adapter.
  Substitute : z	SM or MM

FIBER OPTIC PATCH CORD & PIGTAIL

• Fiber Optic Patch Cord and Pigtail

  

  Description

  Alantek Fiber Optic Patch and Pigtail comes in various length and configuration. All the Patch Cords and Pigtails are factory terminated and tested to ensure a high optical performance.

  Note: All current Multi-mode and Single-mode patch cords and pigtails are UPC polish type.

  

  Part No.	Description
  306-72322M-0030	SC/SC Duplex Singlemode 9/125um Fiber Optic Patch Cord – 3m
  3XG-52312M-0050	ST/SC Duplex OM3 50/125um Fiber Optic Patch Cord – 5m
  306-7P379M-0010	LC Singlemode 9/125um Pigtail – 1m
  3XG-5P329M-1M50	SC OM3 50/125um Pigtail – 1.5m

MTP/MPO INDOOR FIBER OPTIC TRUNK CABLE

• MTP/MPO Indoor Fiber Optic Trunk Cable

  

  Description

  Alantek MPO fiber optic cables is pre-terminated in the factory to allow quick deployments, and is pre-tested to ensure reliability. Pre-calculated length multi-fiber MTP trunk cable assemblies have been proven to substantially reduce installation times and provide better reliability. Not forgetting MPO breakout cable can be used now and later upgrade to female-female MPO for full 100G transfer

  Note: Breakout(Fan-out) will have a 1m inline fan-out (2mm jacket)

  

  Part No.	Description
  3MP-3MMMMB-25M0	12-core OM3 MPO(m)-MPO(m), Type-B, PVC Trunk Cable, 25m
  3MP-3FMFMB-1M50	12-core OM3 MPO(f)-MPO(f), Type-B, PVC Patch Cable, 1.5m
  3MP-3FMMMA-10M0	12-core OM3 MPO(f)-MPO(m), Type-B, PVC Trunk Extension Cable, 10m
  3MP-3FMLDA-3M00	12-core OM3 MPO(f)-6 Duplex LC, Type-A, PVC MPO Breakout Cable, 3m
  3MP-4FMLDS-3M0L	8-core OM4 MPO(f)-4 Duplex LC, Type-QSFP, LSZH MPO Breakout Cable, 3m

FIBER OPTIC CONNECTOR AND ADAPTER (COUPLER)

• Fiber Optic Connector

  

  Description

  Alantek quick assembly connectors provides easy installation as well as superior optical performance. It come with 2 boot for patch cord and pigtail terminations.

  Standards
  •     Complies with IEC 61754-4, IEC 60784-14, IEC 61300, TIA 604-3

  Features​
  •     Low insertion loss, Low reflection loss
  •     Zirconia ferrule
  •     3 mm and 0.9 mm boots for SC, ST, FC
  •     2 mm and 0.9 mm boots for LC
  Specifications 

  Type	Multimode	Singlemode	Singlemode APC
  Insertion Loss	≤ 0.3dB (0.2dB typ.)
  Return Loss	≥ 45 dB	≥ 50 dB	≥ 60 dB
  Durability	≤ 0.2dB typical change, 500 mating
  Insertion Life Cycle	> 1000 times
  Operating Temperature	-40 to +85º C

  Part No.	Description
  306-083211-S2YL	ST Single mode Fiber Optic Connector, Yellow
  306-083211-A2GN	ST APC Single mode Fiber Optic Connector, Green
  306-083211-M2BL	ST Multimode Fiber Optic Connector, Black
  306-083212-S2BU	SC Single mode Fiber Optic Connector, Blue
  306-083212-A2GN	SC APC Single mode Fiber Optic Connector, Green
  306-083212-M2BG	SC Multimode Fiber Optic Connector, Beige
  306-083213-S2YL	FC Single mode Fiber Optic Connector, Yellow
  306-083213-A2GN	FC Single mode Fiber Optic Connector, Green
  306-083213-M2BL	FC Multimode Fiber Optic Connector, Black
  306-083217-S2BU	LC Single mode Fiber Optic Connector, Blue
  306-083217-A2GN	LC Single mode Fiber Optic Connector, Green
  306-083217-M2BG	LC Multimode Fiber Optic Connector, Beige

• Fiber Optic Adaptor (Coupler)

  

  Description

  Alantek adapters are designed with zirconia alignment sleeve for multimode and singlemode, thus achieving the highest quality connection.

  Standards
  •     Complies with IEC 61754-4, IEC 60784-14, IEC 61300, TIA 604-3

  Features​
  •     Low insertion loss
  •     Low back reflection loss

  Specifications

  Type	Multimode	Singlemode	Singlemode APC
  Insertion Loss	≤ 0.1~0.2dB
  Return Loss	≥ 50 dB	≥ 60 dB
  Durability	≤ 0.2dB typical change, 500 mating
  Insertion Life Cycle	> 1000 times
  Operating Temperature	-40 to +85º C

  Part No.	Description
  306-083271-YLSM	ST Singlemode Simplex Fiber Optic Adaptor, Yellow
  306-083371-GNSM	ST APC Singlemode Simplex Fiber Optic Adaptor, Green
  306-083271-BLMM	ST Multimode Simplex Fiber Optic Adaptor, Black
  306-083272-BUSM	SC Singlemode Simplex Fiber Optic Adaptor, Blue
  306-083372-GNSM	SC APC Singlemode Simplex Fiber Optic Adaptor, Green
  306-083272-BGMM	SC Multimode Simplex Fiber Optic Adaptor, Beige
  306-083273-YLSM	FC Singlemode Simplex Fiber Optic Adaptor, Yellow
  306-083373-GNSM	FC APC Singlemode Simplex Fiber Optic Adaptor, Green
  306-083273-BLMM	FC Multimode Simplex Fiber Optic Adaptor, Black
  306-083287-BUSM	LC Singlemode Duplex Fiber Optic Adaptor, Blue
  306-083387-GNSM	LC APC Singlemode Duplex Fiber Optic Adaptor, Green
  306-083287-BGMM	LC Multimode Duplex Fiber Optic Adaptor, Beige

FIBER OPTICS OUTDOOR CLOSURE

• Fiber Optic Outdoor Closure

  

  Description

  The Alantek Outdoor Fiber Closure are available in In-Line Horizontal and Dome design. The Closure is made from high-quality Polycarbonate, and, with the mechanical Sealing Structure fills with sealing materials, ensure the closure is tightly sealed.

  Both model can be used in manhole, pole-mount, aerial-hanger, wall-mounting or direct buried.

  Air valve is also available as an optional accessory for direct burial applications.

  Part No.	Description
  306-FC076I-0024-Sxxx	24-96 core Inline Outdoor Closure (2in, 4out)
  306-FC08PI-0022-S144	144 core Inline Outdoor Closure (2in, 2out)
  306-FC106I-0024-Sxxx	96-144 core Inline Outdoor Closure (2in, 4out)
  306-FC046I-0024-Sxxx	144-288 core Inline Outdoor Closure (2in, 4out)
  306-FC057D-0P13-Sxxx	24-48 core Dome Outdoor Closure (1in, 3out)
  306-FC02PD-0022-S096	96 core Dome Outdoor Closure (4 in/out)
  306-FC017D-0P13-Sxxx	48-96 core Dome Outdoor Closure (1in, 3out)
  306-FC087D-0P16-Sxxx	144-288 core Dome Outdoor Closure (1in, 6out)
  .	Indicate the number of core required at xxx (c/w splice tray & accessories)

FIBER OPTICS TOOLS

• Core Alignment Mini Fusion Splicer

  

  Description

  FS7400 is an automatic core alignment fusion splicer, which is capable of ensuring high-quality splicing even in the most unfavorable environment conditions.

  Features
  •     Compact & Light weight, ~1.95kg
  •     Fully Automatic, Semi-automatic and Manual Operation
  •     8 sec Splice time. 40 sec Tube-heat time.
  •     Able to store up to 8000 splice results
  •     Automatic self-calibration to ensures the best working condition
  •     Functional at 5000m altitude
  •     4.3” Color LCD monitor
  •     Pause function, convenient for research function
  •     USB & DC interface
  •     High battery capacity, up to 120 times of continuous splice and heat

  Part No.	Description
  306-FS7400-0000	Single Fiber Fusion Splicer

• Fiber Optic Universal Stripping Kit

  

  Description

  This Universal Fiber Optic Stripping Kit can be used to strip variety of fiber cable from tight buffer, cordage, indoor distribution, outdoor, armoured and/to figure-8 aerial cable.

  Kit consist of;
  •     1 Fiber optic stripper
  •     1 Kelvar Scissor
  •     1 Fiber Jacket Stripper
  •     1 Longitudinal Buffer Tube Slitter
  •     1 Round Cable Cutter
  •     1 Steel Wire Rope Cutter
  •     1 Carbide fiber Scribe
  •     1 6pcs Electronic Screwdriver Set
  •     1 7’’ Lineman’s plier 178mm
  •     1 6’’ Needle Node Pliers
  •     1 6’’ Side Cut Pliers 130mm
  •     1 8” Adjustable wrench
  •     1 Mini-Hacksaw
  •     1 9Pcs Folding type hex key set (inch)
  •     1 Screwdriver S/D(-)5×100mm
  •     1 Screwdriver S/D(+)#1×100mm
  •     1 Screwdriver S/D(-)6×100mm
  •     1 Screwdriver S/D(+)#2×100mm
  •     1 4 oz.Bottle of Alcohol (empty)
  •     25 Cotton Swabs CS-1 (25pcs/bag)
  •     1 Squeeze Blower
  •     1 Utility knife
  •     1 3.5M Tape Measure
  •     1 Precision tweezer

  Part No.	Description	PDF
  302-F10063-SK00	Fiber Optic Universal Stripping Kit	Download PDF

• Fiber Optic Universal Epoxy/Polish Tool Kit

  

  Description

  Universal Fiber Optic Connector Epoxy/Polish Tool Kit can be used to terminate SC, ST, FC and LC connectors.  This tool kit includes a curing oven to speed the production of connectors.

  Carrying Case (430×330×135mm)
  •    1 Fiber Optic Stripper
  •    1 Kevlar Scissor
  •    1 Crimping Plier for Connector
  •    1 Anti-Static Tweezer
  •    1 Round Cable Stripper
  •    1 Loose Tube Stripper
  •    1 Mini Wire Stripper
  •    1 Marker Pen
  •    1 Carbide Scribe Pen
  •    1 Multipurpose Screwdriver
  •    1 Alcohol Bottle Dispenser 125ml
  •    1 Electrical Tape – Black
  •    1 Fiber Microscope 400X
  •    2 Fiber Adapter SC/ST/FC/LC
  •    1 Safety Glasses
  •    1 Cassette Box Cleaner
  •    1 Liquid Spray Bottle
  •    1 Kimberly Lint-Free Cleaning Paper
  •    1 Accessory Box
  •    1 Polishing Puck – LC (1.25mm)
  •    1 Polishing Puck – SC/ST/FC (2.5mm)
  •    1 One-Push fiber cleaning tool (2.5mm)
  •    10pcs 9µm Polishing Film
  •    10pcs 3µm Polishing Film
  •    10pcs 1µm Polishing Film
  •    10pcs 0.05µm Polishing Film
  •    Rubber Polishing Pad
  •    150W Curing Oven

   

   

  Part No.	Description	PDF
  302-F10060-UP0O	niversal Fiber Optic Connector Epoxy/Polish Tool Kit, with Curing Oven	Download PDF

• Fiber Microscope

  

  Description

  With Alantek 200/400x Fiber Microscope, 2.5mm and 1.25mm ferrule end face can be check for dirt, dust and other contaminants. To avoid the #1 cause of fiber link failure: dirty end-faces.

  Part No.	Description
  306-FMC200-0000	Hand-Held Fiber Microscope 200x
  306-FMC400-0000	Hand-Held Fiber Microscope 400x

• Visual Fault Locator (VFL)

  

  Description

  Alantek Visual Fault Locator locates fiber, finds faults, verifies continuity and polarity. Also a basic maintenance tool for any fiber system.

  Features
  •     Locates visual faults including tight bends, breaks and bad connectors
  •     Accelerates end-to-end fiber checks
  •     Easily verifies polarity and identifies fiber
  •     Features continuous and flashing modes
  •     Supports 2.5mm connector. And 1.25mm connector via SC/LC adapter*.
  •     10mW/650nm locator, over 15 hours of battery life with two AA batteries

  Part No.	Description
  306-FLP650-0000	Visual Fault Locator
  306-082M7F-00SM	Hybrid Singlemode SC male to LC Female adapter

FIBER OPTIC CLEANING TOOLS

• One-Push 2.5, 1.25 and MPO

  

  Description

  These easy-to-use One-Push fiber cleaning tool is great for cleaning connectors on jumpers and in adapters. Simply insert the One-Push cleaner into an adapter and push until an audible “click” is heard. The One-Push cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently cleaned. The One-Push cleaner is a must-have for field technicians. Small enough to fit in a shirt pocket and a great addition to cleaning kits.

  Features
  •     Low cost per clean (800 cleans)
  •     Effective on a variety of contaminates including dust and oils
  •     Automatic advance ensures each clean is performed with fresh cleaning tape
  •     Cleans connectors on jumpers and in adapters, include transmitters too
  •     Ergonomic, comfortable design with single action cleaning

  Part No.	Description
  306-CLF250-0000	2.5mm One-Push cleaner for SC, SC2, ST, FC, DS (800 cleans)
  306-CLF125-0000	1.25mm One-Push cleaner for MU, LC (800 cleans)
  306-CLFMPO-0000	MPO(MTP) One-Push cleaner (500 cleans)

• One-Push Cassette Box Cleaner

  

  Description

  One-Push Cassette box cleaner is essential accessory to maintain and guarantee good quality of fiber optic connection. One of the best non-alcohol cleaning methods for various fiber optic terminations, such as SC, FC, MU, LC, ST, DS, DIN, APC, etc.

  Features
  •     Designed for all types of connectors
  •     Compact size for easy hand-held operations
  •     Dry-clean with the densely stranded and debris free micro-fiber cloth that does not fray or leave any fibrous materials behind
  •     Constructed with anti-static material and eliminates electrostatic charge
  •     400+ Cleanings

  Part No.	Description
  306-CLE001-0000	One-Push Cassette box cleaner

• Cleaning Stick (Swab)

  

  Description

  Alantek cleaning sticks use a fibrous anti-static tip. These cleaning sticks deliver fast and consistent cleaning, even inside alignment sleeves.

  Features
  •     Compact and disposable
  •     No adhesives, binders, or fibers to leave residues

  Part No.	Description
  306-STK250-0000	2.5mm Cleaning Stick (25pcs/Pack)
  306-STK125-0000	1.25mm Cleaning Stick (25pcs/Pack)

FAST ETHERNET FIBER CONVERTER

• Fast Ethernet Fiber Converter 10 /100 Base

  

  Description

  ALANTEK series auto-negotiation Fast Ethernet Fiber Converter can achieve the conversion between 10/100BASE-TX and 100BASE-FX, extending the transmission distance of legal 10M Ethernet or 100M Fast Ethernet up to 120km. It support a wide variety of networks providing a reliable and cost-effective fiber optic connectivity solution for Enterprise networks.

  The modular design and flexible configuration enable scalable fiber network implementation. It can be used as a standalone module or with a 14-slot rack mount chassis.

  

  Part No.	Description
  3MC-FDS2EX-Ty02	2km Singlemode 1310nm Dual Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FDS2EX-Ty20	20km Singlemode 1310nm Dual Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FDS2EX-Ty40	40km Singlemode 1310nm Dual Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FDS2EX-Ty60	60km Singlemode 1310nm Dual Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FDS2EX-Ty80	80km Singlemode 1550nm Dual Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FDS2EX-TyM1	100km Singlemode 1550nm Dual Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FDS2EX-TyMA	120km Singlemode 1550nm Dual Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FSS2EX-Ay20 3MC-FSS2EX-By20	20km Singlemode TX1310/RX1550nm Single Fiber(SC) Fast Ethernet Fiber Converter 20km Singlemode TX1550/RX1310nm Single Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FSS2EX-Ay40 3MC-FSS2EX-By40	40km Singlemode TX1310/RX1550nm Single Fiber(SC) Fast Ethernet Fiber Converter 40km Singlemode TX1550/RX1310nm Single Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FSS2EX-Ay60 3MC-FSS2EX-By60	60km Singlemode TX1490/RX1550nm Single Fiber(SC) Fast Ethernet Fiber Converter 60km Singlemode TX1550/RX1490nm Single Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FSS2EX-Ay80 3MC-FSS2EX-By80	80km Singlemode TX1490/RX1550nm Single Fiber(SC) Fast Ethernet Fiber Converter 80km Singlemode TX1550/RX1490nm Single Fiber(SC) Fast Ethernet Fiber Converter
  3MC-FSS2EX-AyK1 3MC-FSS2EX-ByK1	100km Singlemode TX1490/RX1550nm Single Fiber(SC) Fast Ethernet Fiber Converter 100km Singlemode TX1550/RX1490nm Single Fiber(SC) Fast Ethernet Fiber Converter
  3MC-RK14DP-Wy00	14-slot 2U Fiber Converter Rack with dual power, 100V-275V AC. (Plug and Play)
  Substitute:	y = : E = Europe Style DC Power Adaptor, U = U.S. Style DC Power Adaptor.
  Optional :	Link Fault Pass-through (LFP)
  	Models for ST, FC or LC connector are available upon request.
  	Single Fiber model must be order in a set.

GIGABIT ETHERNET FIBER CONVERTER

• Gigabit Ethernet Fiber Converter 10/100/1000Base

  

  Description

  ALANTEK series auto-negotiation Gigabit Ethernet Fiber Converter can achieve the conversion between 10/100/1000BASE-T and 1000BASE-SX/LX, extending the transmission distance of legal Gigabit Ethernet up to 100 km through Single Mode Fiber. It support a wide variety of networks providing a reliable and cost-effective fiber optic connectivity solution for Enterprise networks.

  The modular design and flexible configuration enable scalable fiber network implementation. It can be used as a standalone module or with a 14-slot rack mount chassis.

  

  Part No.	Description
  3MC-GDM2EX-Ty00	550m Multimode 850nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GDS2EX-Ty00	550m Singlemode 1310nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GDS2EX-Ty10	10km Singlemode 1310nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GDS2EX-Ty20	20km Singlemode 1310nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GDS2EX-Ty40	40km Singlemode 1310nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GDS2EX-Ty60	60km Singlemode 1310nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GDS2EX-Ty80	80km Singlemode 1550nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GDS2EX-TyM1	100km Singlemode 1550nm Dual Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GSS2EX-Ay00 3MC-GSS2EX-By00	550m Singlemode TX1310/RX1550nm Single Fiber(SC) Gigabit Ethernet Fiber Converter 550m Singlemode TX1550/RX1310nm Single Fiber(SC) Gigabit Ethernet Fiber
  3MC-GSS2EX-Ay10 3MC-GSS2EX-By10	10km Singlemode TX1310/RX1550nm Single Fiber(SC) Gigabit Ethernet Fiber Converter 10km Singlemode TX1550/RX1310nm Single Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GSS2EX-Ay20 3MC-GSS2EX-By20	20km Singlemode TX1310/RX1550nm Single Fiber(SC) Gigabit Ethernet Fiber Converter 20km Singlemode TX1550/RX1310nm Single Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GSS2EX-Ay40 3MC-GSS2EX-By40	40km Singlemode TX1310/RX1550nm Single Fiber(SC) Gigabit Ethernet Fiber Converter 40km Singlemode TX1550/RX1310nm Single Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GSS2EX-Ay60 3MC-GSS2EX-By60	60km Singlemode TX1490/RX1550nm Single Fiber(SC) Gigabit Ethernet Fiber Converter 60km Singlemode TX1550/RX1490nm Single Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-GSS2EX-Ay80 3MC-GSS2EX-By80	80km Singlemode TX1490/RX1550nm Single Fiber(SC) Gigabit Ethernet Fiber Converter 80km Singlemode TX1550/RX1490nm Single Fiber(SC) Gigabit Ethernet Fiber Converter
  3MC-RK14DP-Wy00	14-slot 2U Fiber Converter Rack with dual power, 100V-275V AC. (Plug and Play)
  Substitute:	y = : E = Europe Style DC Power Adaptor, U = U.S. Style DC Power Adaptor.
  Optional :	Link Fault Pass-through (LFP)
  	Models for ST, FC or LC connector are available upon request.
  	Single Fiber model must be order in a set.

Giải Pháp CATV Alantek

CATV BACKBONE AND DROP CABLE

• CATV DROP CABLES

  

  Description

  Alantek coaxial drop cable includes RG59, RG6 and RG11 series, with excellent electrical performance, mainly applied to CATV network distribution. Nitrogen-CO2 Foamed Polyethylene can achieved excellent transmission property. Cable jacket utilizes different kinds of material according to actual demands. Alantek RG series cable has passed serious tests including high/low temperature test, ultraviolet test, hot wet test, fire retardant test, salt fog test and etc,.

  Part No.	Description
  301-RG5900-SSBK-1223	CATV RG59 Coaxial Cable 75 Ohms, 60% Braid, PVC Black, 305m
  301-RG5900-SSBK-1253	CATV RG59 Coaxial Cable 75 Ohms, 90% Braid, PVC Black, 305m
  301-RG0600-SSBK-1223	CATV RG6 Coaxial Cable 75 Ohms, 60% Braid, PVC Black, 305m
  301-RG0600-SSBK-1253	CATV RG6 Coaxial Cable 75 Ohms, 90% Braid, PVC Black, 305m
  301-RG1100-SSBK-2223	CATV RG11 Coaxial Cable 75 Ohms, 60% Braid, PE Black, 305m
  301-RG1100-SSBK-2253	CATV RG11 Coaxial Cable 75 Ohms, 90% Braid, PE Black, 305m
  301-RG590F-SSBK-1223	CATV RG59 Coaxial Cable 75 Ohms, 60% Braid, PVC Black, with Flooding Comp., 305m
  301-RG060F-SSBK-1223	CATV RG6 Coaxial Cable 75 Ohms, 60% Braid, PVC Black, with Flooding Comp., 305m
  301-RG110F-SSBK-2223	CATV RG11 Coaxial Cable 75 Ohms, 60% Braid, PE Black, with Flooding Comp., 305m
  301-RG590M-SSBK-1223	CATV RG59 Coaxial Cable 75 Ohms, 60% Braid, PVC Black, with Messenger, 305m
  301-RG060M-SSBK-1223	CATV RG6 Coaxial Cable 75 Ohms, 60% Braid, PVC Black, with Messenger, 305m
  301-RG110M-SSBK-2223	CATV RG11 Coaxial Cable 75 Ohms, 60% Braid, PE Black, with Messenger, 305m
  301-RG59FM-SSBK-1223	CATV RG59 Coaxial Cable 75?, 60% Braid, PVC Black, with Msger. & Fldg. Comp., 305m
  301-RG06FM-SSBK-1223	CATV RG6 Coaxial Cable 75?, 60% Braid, PVC Black, with Msger. & Fldg. Comp., 305m
  301-RG11FM-SSBK-2223	CATV RG11 Coaxial Cable 75?, 60% Braid, PE Black, with Msger. & Fldg. Comp., 305m
  301-RG5900-3SBK-1293	CATV RG59 Tri-Shield Coaxial Cable 75 Ohms, 77% Braid, PVC Black, 305m
  301-RG0600-3SBK-1293	CATV RG6 Tri-Shield Coaxial Cable 75 Ohms, 77% Braid, PVC Black, 305m
  301-RG1100-3SBK-2293	CATV RG11 Tri-Shield Coaxial Cable 75 Ohms, 77% Braid, PE Black, 305m

CATV TRUNK CABLE

• CATV TRUNK CABLES

  

  Description

  Alantek 75Ω Trunk Cable is optimized for use in broadband application. With low attenuation, inherent strength and proven performance and reliability, making it the right choice for distribution applications. Available in Flooding and Messenger version.

  Part No.	Description
  301-0AC500-0000	AC500 75Ω Coaxial Trunk Cable with Messenger
  301-0AC500-00NM	AC500 75Ω Coaxial Trunk Cable Non-messenger
  301-0AC500-0FNM	AC500 75Ω Coaxial Trunk Cable with Flooding Compound, Non-messenger
  301-0AC540-0000	AC540 75Ω Coaxial Trunk Cable with Messenger
  301-0AC540-00NM	AC540 75Ω Coaxial Trunk Cable Non-messenger
  301-0AC540-0FNM	AC540 75Ω Coaxial Trunk Cable with Flooding Compound, Non-messenger
  301-0AC565-0000	AC565 75Ω Coaxial Trunk Cable with Messenger
  301-0AC565-00NM	AC565 75Ω Coaxial Trunk Cable Non-messenger
  301-0AC565-0FNM	AC565 75Ω Coaxial Trunk Cable with Flooding Compound, Non-messenger

CATV F CONNECTORS

• Compression F Connector

  

  Description

  This compression F connector series is a well proven design that secure the cable to the connecctor in a 360° compressed plastic sleeve.

  Characteristics
  •     1-piece design, simplify termination time.
  •     Assist Guide for easy insertion and guide. Guide can be discard when cable’s foam insulation are fully flush with post.
  •     Double(triple for RG11) rubber O-ring to prevent moisture migration.
  •     Weather resistant Nickel-Tin Plated Brass body.
  •     UV resistant plastic sleeve.
  •     Excellent return loss of 27~43dB @ 1GHz*
  •     Cable retention exceeds 18kg(40lb) minimum as specified by the SCTE

  Physical Properties

  Nut	: Brass with Nickel Tin Plated
  Collar	: Brass with Nickel Tin Plated
  Post	: Brass with Tin Plated
  O-Rings	: Ethylene Propylene Rubber

  Electrical Properties

  Insertion Loss	: ≤ 0.18 dB (up to 1GHz Typical)
  RFI Shielding	: -85 dB (up to 1GHz Typical)
  Return Loss (min)

  Mechanical Properties

  ​Environmental Properties

  Operation Temperature	: -40°C to 60°C (-40°F to 140°F)
  Moisture Migration	: Complies to ANSI/SCTE 60 2004

  ​Tools Required

  

  Part No.	Description
  3CN-CFSNS0-RG59	RG59 Compression F Connector
  3CN-CFSNS0-RG06	RG6 Compression F Connector
  3CN-CFSNS0-RG11	RG11 Compression F Connector
  3CN-CFSNSR-RG11	RG11 Compression F Connector, Right Angled
  302-CBJ561-0000	Compression tool for SNS Series
  302-CJR561-0000	Compression tool for SNS Series
  302-CSP561-J000	Coax Cable Stripper for RG59/6/7/11

CATV INDOOR SPLITTERS AND TAPS

• CATV Indoor Splitter

  

  Description

  Alantek CATV Splitter is designed with high grade circuitry for minimal signal loss and maximum transfer. With a ground connection and a precision cast body it is an effective and durable solution.

  Features

  •     Zinc plated housing, corrosion resistance
  •     Double Mounting Taps for easy installation
  •     Low insertion loss, high Isolation and Return loss
  •     All ports with blocking capacitors
  •     Concave soldered-back design for protection against RFI
  •     Connector : F female, 75Ω

  ​Also available in 10, 12 ,14 and 16 ways.

  Part No.	Description	PDF
  308-ISPV02-00002	2-Way CATV Indoor Splitter	Download PDF
  308-ISPV03-0000	3-Way CATV Indoor Splitter	Download PDF
  308-ISPV04-0000	4-Way CATV Indoor Splitter	Download PDF
  308-ISPV06-0000	6-Way CATV Indoor Splitter	Download PDF
  308-ISPV08-0000	8-Way CATV Indoor Splitter	Download PDF

• CATV Indoor Taps

  

  Description

  Alantek CATV Taps(Directional Couplers) is designed with high grade circuitry for minimal signal loss, stable tap out value and maximum transfer. With a ground connection and a precision cast body it is an effective and durable solution.

  Features

  •     Zinc plated housing, corrosion resistance
  •     Double Mounting Taps for easy installation
  •     Low insertion loss, stable tap-out high Isolation and return loss
  •     Concave soldered-back design for protection against RFI
  •     Connector : F female, 75Ω

  ​Also available in 5, 6, 8, 10, 12 ,14 and 16 ways.

  Part No.	Description	PDF
  308-ITPV01-0008	1-Way Indoor Tap, 8dB Tap Loss	Download PDF
  308-ITPV01-0010	1-Way Indoor Tap, 10dB Tap Loss	Download PDF
  308-ITPV01-0014	1-Way Indoor Tap, 14dB Tap Loss	Download PDF
  308-ITPV01-0016	1-Way Indoor Tap, 16dB Tap Loss	Download PDF
  308-ITPV02-0008	2-Way Indoor Tap, 8dB Tap Loss	Download PDF
  308-ITPV02-0016	2-Way Indoor Tap, 16dB Tap Loss	Download PDF
  308-ITPV02-0018	2-Way Indoor Tap, 18dB Tap Loss	Download PDF
  308-ITPV02-0020	2-Way Indoor Tap, 20dB Tap Loss	Download PDF
  308-ITPV03-0009	3-Way Indoor Tap, 9dB Tap Loss	Download PDF
  308-ITPV03-0010	3-Way Indoor Tap, 10dB Tap Loss	Download PDF
  308-ITPV03-0016	3-Way Indoor Tap, 16dB Tap Loss	Download PDF
  308-ITPV03-0018	3-Way Indoor Tap, 18dB Tap Loss	Download PDF
  308-ITPV03-0020	3-Way Indoor Tap, 20dB Tap Loss	Download PDF
  308-ITPV04-0011	4-Way Indoor Tap, 11dB Tap Loss	Download PDF
  308-ITPV04-0012	4-Way Indoor Tap, 12dB Tap Loss	Download PDF
  308-ITPV04-0016	4-Way Indoor Tap, 16dB Tap Loss	Download PDF
  308-ITPV04-0018	4-Way Indoor Tap, 18dB Tap Loss	Download PDF
  308-ITPV04-0020	4-Way Indoor Tap, 20dB Tap Loss	Download PDF
  308-ITPV04-0022	4-Way Indoor Tap, 22dB Tap Loss	Download PDF
  308-ITPV04-0024	4-Way Indoor Tap, 24dB Tap Loss	Download PDF

CATV INDOOR SATELLITE SPLITTER ( 3GHZ )

• CATV Indoor Satellite Splitter ( 3GHZ )

  

  Description

  Alantek 3Ghz Satellite Splitter is designed with high grade circuitry for minimal signal loss and maximum transfer. With a ground connection and a precision cast body it is an effective and durable solution.

  Features

  •     Zinc plated housing, corrosion resistance
  •     Double Mounting Taps for easy installation
  •     Low insertion loss, high Isolation and Return loss
  •     All ports with blocking capacitors
  •     Concave soldered-back design for protection against RFI
  •     Connector : F female, 75Ω

  Part No.	Description	PDF
  308-ISPV02-3G00	2-Way Indoor Satellite Splitters (3ghz)	Download PDF
  308-ISPV03-3G00	3-way Indoor Satellite Splitters (3ghz)	Download PDF
  308-ISPV04-3G00	4-Way Indoor Satellite Splitters (3ghz)	Download PDF
  308-ISPV06-3G00	6-way Indoor Satellite Splitters (3ghz)	Download PDF
  308-ISPV08-3G00	8-Way Indoor Satellite Splitters (3ghz)	Download PDF

CATV OUTDOOR SPLITTERS AND TAPS

• CATV Outdoor Splitter

  

  Description

  Alantek CATV Outdoor Splitter is designed with high grade circuitry for minimal signal loss and maximum transfer. With a ground connection and a precision cast body it is an effective and durable solution.

  Features

  •     Cast aluminium waterproof housing, corrosion resistance
  •     Low insertion loss, high Isolation and return loss
  •     Standard F connector interface, 75Ω
  •     Power passing : 10A

  ​

  Part No.	Description	PDF
  308-OSPV02-B000	2-Way CATV Outdoor Splitter	Download PDF
  308-OSPV03-B000	3-Way CATV Outdoor Splitter	Download PDF
  308-ISPV04-0000	4-Way CATV Outdoor Splitter	Download PDF
  308-PIPV01-0000	CATV Outdoor Power Inserter	Download PDF

• CATV Outdoor Taps

  

  Description

  Alantek CATV Outdoor Tap is designed with high grade circuitry for minimal signal loss, stable tap out value and maximum transfer. With a ground connection and a precision cast body it is an effective and durable solution.

  Features

  •     Cast aluminium waterproof housing, corrosion resistance
  •     Low insertion loss, stable tap-out, high Isolation and return loss
  •     Standard 5/8 coaxial cable interface, 75Ω
  •     Power passing : 10A

  ​

  Part No.	Description	PDF
  308-DCPV01-0008	Directional Coupler, 8dB Tap Loss	Download PDF
  308-DCPV01-0012	Directional Coupler, 12dB Tap Loss	Download PDF
  308-DCPV01-0016	Directional Coupler, 16dB Tap Loss	Download PDF
  308-DCPV01-0020	Directional Coupler, 20dB Tap Loss	Download PDF
  308-OTPV02-0010	2-Way Outdoor Tap, 10dB Tap Loss	Download PDF
  308-OTPV02-0010	2-Way Outdoor Tap, 12dB Tap Loss	Download PDF
  308-OTPV04-0008	4-Way Outdoor Tap, 8dB Tap Loss	Download PDF
  308-OTPV04-0011	4-Way Outdoor Tap, 11dB Tap Loss	Download PDF
  308-OTPV04-0014	4-Way Outdoor Tap, 14dB Tap Loss	Download PDF
  308-OTPV04-0017	4-Way Outdoor Tap, 17dB Tap Loss	Download PDF
  308-OTPV04-0020	4-Way Outdoor Tap, 20dB Tap Loss	Download PDF
  308-OTPV04-0023	4-Way Outdoor Tap, 23dB Tap Loss	Download PDF
  308-OTPV08-0011	8-Way Outdoor Tap, 11dB Tap Loss	Download PDF
  308-OTPV08-0014	8-Way Outdoor Tap, 14dB Tap Loss	Download PDF
  308-OTPV08-0017	8-Way Outdoor Tap, 17dB Tap Loss	Download PDF
  308-OTPV08-0020	8-Way Outdoor Tap, 20dB Tap Loss	Download PDF
  308-OTPV08-0023	8-Way Outdoor Tap, 23dB Tap Loss	Download PDF
  308-OTPV08-0026	8-Way Outdoor Tap, 26dB Tap Loss	Download PDF

CATV CHANNEL MODULATOR

• CATV Channel Modulator

  

  Description

  A headend equipment for adjacent channel modulation of image and acoustical signals. Medium frequency treatment technique and phase locked loop technology are adopted to improve frequency stability and reduce signal distortion. It’s the best choice for large and medium-sized CATV systems.

  Features

  •     High performance Surface Acoustic Wave Filters and Spiral Bandpass
  Filters are adopted to improve out-of-band rejection.
  •     Independent RF Power Amplifiers are inside. The output level is up to over 110dBμV.
  •     Vision signal modulation, audio deviation, A/V ratio and output level can be adjusted on the front panel.
  •     Automatic storage and channel retention after power off

  Part No.	Description
  308-FMC680-0000	860MHz Adjacent Channel Modulator
  308-AMC78B-0000	860MHz Adjacent Channel Agile Modulator

CATV COMBINER

• CATV Combiner

  

  Features

  •     High isolation
  •     Low loss
  •     Compound use and direct connection
  •     Suitable for various large and small-size networks front-end

  Part No.	Description
  308-PCC680-0016	Passive Multipath 16-port Combiner
  308-PCC680-0024	Passive Multipath 24-port Combiner

CATV BIDIRECTIONAL AMPLIFIER

• CATV Bidirectional Amplifier

  

  Description

  Bidirectional amplifier is mainly used for bidirectional transmission of CATV television image signal, digital TV signal, telephone voice signals and data (or compressed data) signal. These amplifiers are built for low power consumption, high reliability and high performance cost ratio.

  Part No.	Description
  308-IA3086-3000	Indoor Bidirectional Amplifier, 30dB
  308-OA81KE-3800	Outdoor Slim Bidirectional Amplifier, 38dB

CATV OPTICAL TRANSMITTER

• CATV Optical Transmitter

  

  Description

  Alantek have a wide range of Optical Transmission Equipment, from 1550nm EDFA transmitter to traditional 1310nm transmitter. With a variety of output ports and power.

  * Multiple output ports and power available at request

  Part No.	Description
  308-OT15E1-0700	1550nm CATV External Modulated EDFA Optical Transmitter, 1 x 7dBm
  308-OT15WE-1900	1550nm CATV EDFA Optical Transmitter, 1 x 19dBm
  308-OT1386-13G0	1310nm CATV Optical Transmitter, 1 x 13dBm

CATV OPTICAL RECEIVER

• CATV Optical Receiver

  

  Description

  Alantek have a wide range of Optical Receiver Equipment, from indoor model to outdoor. With a dynamic AGC Optical input range and variety of 2 and 4 output ports.

  Part No.	Description
  308-IRJL02-00B2	Indoor Bidirectional Optical Receiver, 2-port output
  308-IRJL02-00B4	Indoor Bidirectional Optical Receiver, 4-port output
  308-OR86LJ-00B2	Outdoor Bidirectional Optical Receiver, 2-port
  308-OR86JD-00B4	Outdoor Bidirectional Optical Receiver, 4-port

Giải Pháp CCTV Alantek

CCTV COAXIAL CABLES

• CCTV Coaxial Cables

  

  Description

  Alantek CCTV (Closed circuit Television) coaxial cable includes RG59 and RG6 series, are built to excel in video quality and distance. Nitrogen-CO2 Foamed Polyethylene can achieved excellent transmission property and heavily shielded to minimize interference and provide proper baseband performance.

  ​

  Part No.	Description
  301-RG5900-SSBK-14F3	CCTV RG59 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CU Braid, PVC Black, 305m
  301-RG0600-SSBK-14F3	CCTV RG6 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CU Braid, PVC Black, 305m
  301-RG1100-SSBK-14F3	CCTV RG11 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CU Braid, PVC Black, 305m
  301-RG590C-SSBK-14F3-0500	CCTV RG59 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CU Braid, with 2-Core 0.50mm2 Power conductor, PVC Black, 305m
  301-RG060C-SSBK-14F3-0700	CCTV RG59 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CU Braid, with 2-Core 0.75mm2 Power conductor, PVC Black, 305m
  301-RG5900-SSBK-15F3	CCTV Flexible RG59 Coaxial Cable 75 Ohms, Stranded Copper Conductor, 95% CU Braid, PVC Black, 305m
  301-RG0600-SSBK-15F3	CCTV Flexible RG6 Coaxial Cable 75 Ohms, Stranded Copper Conductor, 95% CU Braid, PVC Black, 305m

• CCTV Coaxial Cables (CCA Braid)

  

  Description

  Alantek CCTV (Closed circuit Television) coaxial cable includes RG59 and RG6 series, are built for optimal video quality. Nitrogen-CO2 Foamed Polyethylene can achieved excellent transmission property and CCA (Copper Clad Aluminum) braid shielded to minimize interference and provide proper base-band performance.

  ​

  Part No.	Description
  301-RG5900-SSBK-14Y3	CCTV RG59 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CCA Braid, PVC Black, 305m
  301-RG0600-SSBK-14Y3	CCTV RG6 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CCA Braid, PVC Black, 305m
  301-RG590C-SSBK-14Y3-0500	CCTV RG59 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CCA Braid, with 2-Core 0.50mm2 Power conductor, PVC Black, 305m
  301-RG060C-SSBK-14Y3-0700	CCTV RG59 Coaxial Cable 75 Ohms, Solid Copper Conductor, 95% CCA Braid, with 2-Core 0.75mm2 Power conductor, PVC Black, 305m

COMPRESSION BNC CONNECTOR

• Compression BNC Connector

  

  Description

  This compression BNC connector series is a well proven design that secure the cable to the connector in a 360° compressed plastic sleeve.

  Characteristics

  •     1-piece design, simplify termination time.
  •     Assist-Pin for easy insertion and guide through. Pin will be fully flush with the connector when fully inserted.
  •     Double rubber O-ring to prevent moisture migration.
  •     Weather resistant Nickle-Tin Plated Brass body.

  Physical Properties

  Nut	: Brass with Nickel Tin Plated
  Collar	: Brass with Nickel Tin Plated
  Post	: Brass with Tin Plated
  O-Rings	: Ethylene Propylene Rubber

  Electrical Properties

  Insertion Loss	: ≤ 0.18 dB (up to 1GHz Typical)
  RFI Shielding	: -85 dB (up to 1GHz Typical)
  Return Loss (min)

  Mechanical Properties

  ​Environmental Properties

  Operation Temperature	: -40°C to 60°C (-40°F to 140°F)
  Moisture Migration	: Complies to ANSI/SCTE 60 2004

  ​Tools Required

  

  Part No.	Description
  3CN-CBSNS0-RG59	RG59 Compression BNC Connector
  3CN-CBSNS0-RG06	RG6 Compression BNC Connector
  3CN-CBSNS0-RG11	RG11 Compression BNC Connector
  302-CBJ561-0000	Compression tool for SNS Series
  302-CJR561-0000	Compression tool for SNS Series
  302-CSP561-J000	Coax Cable Stripper for RG59/6/7/11

CCTV COAXIAL-FIBER VIDEO CONVERTOR

• CCTV Coaxial-Fiber Video Convertor

  

  Description

  Alantek Coaxial-Fiber CCTV Video Convertor can simultaneously transmit 1, 2, 4, 8, 16 and up to 64 video channel in one singlemode fiber. Plug and Play design to ensure instantaneous results every time and simplicity of installation and operation. Support RS-232, RS-422 and RS-485 for PTZ control. Dry contact function is possible too.

  Characteristics

  •     Compatible with NTSC, PAL and SECAM CCTV signal
  •     8-bit digital encoding and non-compression video transmission
  •     Support High-resolution video signal
  •     Support RS-232, RS-422, and RS-485 data protocols

   

  Optional

  •     Unidirectional or bidirectional audio (24bit)
  •     Dry contact

  * 40km, 60km or 80km model is also available upon request.
  ​

  Part No.	Description
  3VC-T01UX-0020-0000	1 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Transmitter
  3VC-R01UX-0020-0000	1 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Receiver
  3VC-T02UX-0020-0000	2 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Transmitter
  3VC-R02UX-0020-0000	2 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Receiver
  3VC-T04UX-0020-0000	4 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Transmitter
  3VC-R04UX-0020-0000	4 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Receiver
  3VC-T08UX-0020-0000	8 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Transmitter
  3VC-R08UX-0020-0000	8 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Receiver
  3VC-T16UI-0020-0000	16 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Transmitter
  3VC-R16UI-0020-0000	16 Channel CCTV Coaxial-Fiber Video Convertor, Singlemode, 20km, Receiver
  3VC-T64UD-0020-0000	64 Channel CCTV Coaxial-Fiber Video Convertor, Dual Power, Singlemode, 20km, Transmitter
  3VC-R64UD-0020-0000	64 Channel CCTV Coaxial-Fiber Video Convertor, Dual Power, Singlemode, 20km, Receiver
  3VC-Txxyza-bc20-defg	Substiture xx: no# of video channel. y: fiber connector, 1=ST, 2=SC, 3=FC, 7=LC z: E= Europe Adapter/plug, U= U.S. Adapter/plug. a: X=External Power, I=External Power, D=Dual Power b: 2=RS232, 4=RS422, 5=RS485. c: no# of Dry Contact. d=no# of audio. e: T=Transmit, R=Receive, B=BiDirectional. f: E=100Base-T. g: T=Telephone

ETHERNET SWITCH (POE OPTION)

• Fast Ethernet Switch (PoE Option)

  

  Description

  Alantek Desktop/Wall Mount and Rack Mount Fast Ethernet Switch is an entry level industrial grade design. Suitable for small commercial ITS and DCS Ethernet system. Multiple Fast Ethernet port couple with 1 to 16 fiber port to ensure performance bandwidth.

  Characteristics

  •     Plug and Play configuration
  •     Support store and forward transmission
  •     Supports 10 KB jumbo frames
  •     Broadcast storm protection
  •     Transparent transmission of VLAN tagged packets
  •     No fan, low consumption, EMC-4 grade design
  •     All port anti-lighting (6KV)
  •     3KV isolation protection
  •     IP30 protection, metal shell
  •     Operating Temperature: -20 ~ 60 °C

  Optional – PoE/PoE+

  ​ <- Click for PoE options

  Part No.	Description
  3ES-01F01F-2UUI	1 Port Fast Ethernet Switch (1 Duplex SC 100-BaseFX)
  3ES-04F01F-2UUI	4 Port Fast Ethernet Switch (1 Duplex SC 100-BaseFX)
  3ES-04FN1G-0UUI	4 Port Fast Ethernet Switch and 1 Port Gigabit Ethernet Switch
  3ES-08F01F-2UUI	8 Port Fast Ethernet Switch (1 Duplex SC 100-BaseFX)
  3ES-08F01G-2UUI	8 Port Fast Ethernet Switch (1 Duplex SC 1000-BaseFX)
  3ES-08F02G-2UUI	8 Port Fast Ethernet Switch (2 Duplex SC 1000-BaseFX)
  3ES-16F2GX-2UUI	16 Port Fast Ethernet Switch (2 Duplex SC 1000-BaseFX / combo / 2 Port Fast Ethernet)
  3ES-24F2GX-2UUI	24 Port Fast Ethernet Switch (2 Duplex SC 1000-BaseFX / combo / 2 Port Fast Ethernet)
  3ES-02G16F-2UUI	2 Port Gigabit Ethernet Switch (16 Duplex SC 100-BaseFX)
  Substitute :	x: fiber connector, 1=ST, 2=SC, 3=FC, 7=LC. y: U=Unmanage, M=Managed. z: E= Europe Adapter/plug, U= U.S. Adapter/plug. a: X=External Power, I=External Power b: F=15.4W, T=25.5W. ccc: wattage *Example : 3ES-01F01F-2UUI-T030 , 1 Port Fast Ethernet Switch with 25W PoE

• Gigabit Ethernet Switch (PoE Option)

  

  Description

  Alantek Desktop/Wall Mount and Rack Mount Gigabit Ethernet Switch is an entry level industrial grade design. Suitable for upgrading existing ITS and DCS Fast Ethernet system. Multiple gigabit Ethernet port couple with 1 to 12 fiber port to ensure performance bandwidth.

  Characteristics

  •     Plug and Play configuration
  •     Support store and forward transmission
  •     Supports 10 KB jumbo frames
  •     Broadcast storm protection
  •     Transparent transmission of VLAN tagged packets
  •     No fan, low consumption, EMC-4 grade design
  •     All port anti-lighting (6KV)
  •     3KV isolation protection
  •     IP30 protection, metal shell
  •     Operating Temperature: -20 ~ 60 °C

  Optional – PoE/PoE+

  ​<- Click for PoE options

  Part No.	Description
  3ES-01G01G-2UUI	1 Port Gigabit Ethernet Switch (1 Duplex SC 1000-BaseFX)
  3ES-04G01G-2UUI	4 Port Gigabit Ethernet Switch (1 Duplex SC 1000-BaseFX)
  3ES-04G02G-2UUI	4 Port Gigabit Ethernet Switch (2 Duplex SC 1000-BaseFX)
  3ES-05G01G-2UUI	5 Port Gigabit Ethernet Switch (1 Duplex SC 1000-BaseFX)
  3ES-08G01G-2UUI	8 Port Gigabit Ethernet Switch (1 Duplex SC 1000-BaseFX)
  3ES-08G02G-2UUI	8 Port Gigabit Ethernet Switch (2 Duplex SC 1000-BaseFX)
  3ES-12G04G-2UUI	12 Port Gigabit Ethernet Switch (4 Duplex SC 1000-BaseFX)
  3ES-12G12G-2UUI	12 Port Gigabit Ethernet Switch (12 Duplex SC 1000-BaseFX)
  3ES-24G02G-2UUI	24 Port Gigabit Ethernet Switch (2 Duplex SC 1000-BaseFX)
  Substitute :	x: fiber connector, 1=ST, 2=SC, 3=FC, 7=LC. y: U=Unmanage, M=Managed. z: E= Europe Adapter/plug, U= U.S. Adapter/plug. a: X=External Power, I=External Power b: F=15.4W, T=25.5W. ccc: wattage *Example : 3ES-01F01F-2UUI-T030 , 1 Port Fast Ethernet Switch with 25W PoE

SFP FIBER MODULES (SMALL FORM-FACTOR PLUGGABLE)

• SFP Fiber Modules (Small Form-Factor Pluggable)

  

  Description

  Alantek offer a variety of SFP and SFP+ modules from traditional duplex fiber to WDM single fiber, 155M to 10G and ranges from 220m to 120km. Option of Digital Diagnostics Monitoring(DDM) can be requested. Which provide ability to monitor parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage, in real time.

  ​ <- Click for more options

  Part No.	Description
  3PT-DF3300-0020	155M SFP SM 1310nm FP 20KM Duplex-LC
  3PT-DF3300-0040	155M SFP SM 1310nm FP 40KM Duplex-LC
  3PT-DF5500-0080	155M SFP SM 1550nm DFP 80KM Duplex-LC
  3PT-DG8800-00K5	1.25G SFP MM 850nm VCSEL 550m Duplex-LC
  3PT-DG3300-0010	1.25G SFP SM 1310nm FP 10KM Duplex-LC
  3PT-DG3300-0020	1.25G SFP SM 1310nm FP 20KM Duplex-LC
  3PT-DG3300-0030	1.25G SFP SM 1310nm FP 30KM Duplex-LC
  3PT-DG5500-0050	1.25G SFP SM 1550nm FP 50KM Duplex-LC
  3PT-DG5500-0080	1.25G SFP SM 1550nm DFB 80KM Duplex-LC
  3PT-DG5500-0120	1.25G SFP SM 1550nm DFB ,SM,APD 120KM Duplex-LC
  3PT-DH3300-0020	2.5G SFP SM 1310nm DFP 20KM Duplex-LC
  3PT-DH3300-0040	2.5G SFP SM 1310nm DFP 40KM Duplex-LC
  3PT-DH3300-0060	2.5G SFP SM 1310nm DFP 60KM Duplex-LC
  3PT-DX8800-00K2	10G SFP+ MM 850nm VCSEL 220m Duplex-LC
  3PT-DX3300-0010	10G SFP+ SM 1310nm FP 10km Duplex-LC
  3PT-DX3300-0040	10G SFP+ SM 1310nm DFP 40km Duplex-LC
  3PT-DX3300-0080	10G SFP+ SM 1310nm(ZR) DFP 80km Duplex-LC
  3PT-SG35W0-0003 3PT-SG53W0-0003	1.25G SFP SM WDM Tx1310/Rx1550 FP 3KM Simplex-LC 1.25G SFP SM WDM Tx1550/Rx1310 DFP 3KM Simplex-LC
  3PT-SG35W0-0020 3PT-SG53W0-0020	1.25G SFP SM WDM Tx1310/Rx1550 FP 20KM Simplex-LC 1.25G SFP SM WDM Tx1550/Rx1310 DFP 20KM Simplex-LC
  3PT-SG35W0-0040 3PT-SG53W0-0040	1.25G SFP SM WDM Tx1310/Rx1550 FP 40KM Simplex-LC 1.25G SFP SM WDM Tx1550/Rx1310 DFP 40KM Simplex-LC
  3PT-SG45W0-0060 3PT-SG54W0-0060	1.25G SFP SM WDM Tx1490/Rx1550 DFP 60KM Simplex-LC 1.25G SFP SM WDM Tx1550/Rx1490 DFP 60KM Simplex-LC
  3PT-SG45W0-0080 3PT-SG54W0-0080	1.25G SFP SM WDM Tx1490/Rx1550 DFP 80KM Simplex-LC 1.25G SFP SM WDM Tx1550/Rx1490 DFP 80KM Simplex-LC
  -xyyy	Substitute x: 0 = No DDM, D = DDM

Cáp Tín Hiệu Điều Khiển ALANTEK

TWISTED MULTIPAIR CONTROL/AUDIO CABLE

• Shielded Twisted Multipair Control/Audio Cable

  

  Description

  Alantek Shielded Twisted Multipair Control Cable consists of Stranded Tinned Copper Conductor with colour coded HDPE Insulation, overall cover with Aluminum Mylar Tape with minimum 25% overlap, Tinned Copper Drain Wire and Outer PVC Jacket.

  Part No.	Description
  301-CI96xx-0500	14 AWG Shielded Twisted Pair Control Cable
  301-CI95xx-0500	16 AWG Shielded Twisted Pair Control Cable
  301-CI94xx-0500	18 AWG Shielded Twisted Pair Control Cable
  301-CI93xx-0500	20 AWG Shielded Twisted Pair Control Cable
  301-CI92xx-0500	22 AWG Shielded Twisted Pair Control Cable
  xx-0yzz	Substitute :     xx = Number of Pair y : 3= 305m/Box, 5=500m/reel, 1=1000m/reel zz : 00 = PVC, LS = LSZH(Orange colour jacket) Other sizes from 30AWG to 10AWG are available upon request

• Unshielded Twisted Pair Audio Cable

  

  Description

  Alantek Unshielded Twisted Pair Audio Cable consists of Stranded Tinned Copper Conductors with colour coded PVC Insulation and Outer PVC Jacket.

  Part No.	Description
  301-CI8701-0500	1 pair 12 AWG Unshielded Twisted Pair Audio Cable
  301-CI8601-0500	1 pair 14 AWG Unshielded Twisted Pair Audio Cable
  301-CI8501-0500	1 pair 16 AWG Unshielded Twisted Pair Audio Cable
  301-CI8401-0500	1 pair 18 AWG Unshielded Twisted Pair Audio Cable
  xx-0yzz	Substitute :     xx = Number of Pair y : 3= 305m/Box, 5=500m/reel, 1=1000m/reel zz : 00 = PVC, LS = LSZH(Orange colour jacket) Other sizes from 30AWG to 10AWG are available upon request

FIRE RETARDANT CABLE

• Shielded/Unshielded Fire Retardant Control Cable

  

  Description

  Alantek Fire Retardant Control Cable consists of Bare Copper Conductor with LSZH Insulation, Aluminium Foil and Outer LSZH Jacket.

   

  Other sizes from 0.5mm² to 4.0mm², multiple core or pairs are available upon request.

  Part No.	Description
  301-FRU015-201P-3M05	1-pair 1.5mm2 Unshielded Fire Retardant Control Cable, Orange (500m)
  301-FRU025-201P-3M05	1-pair 2.5mm2 Unshielded Fire Retardant Control Cable, Orange (500m)
  301-FRS015-201P-3M05	1-pair 1.5mm2 Shielded Fire Retardant Control Cable, Orange (500m)
  301-FRS025-201P-3M05	1-pair 2.5mm2 Shielded Fire Retardant Control Cable, Orange (500m)

FIRE RESISTANT CABLE

• Shielded/Unshielded Fire Resistant Control Cable

  

  Description

  Alantek Fire Resistant Control Cable consists of Bare Copper Conductor with Mica Tape, XLPE Insulation , with or without Aluminium Foil and Outer LSZH Jacket

   

  Replace ‘FRS’ to ‘FRU’ for unshielded solution.

  * Other sizes from AWG, 0.5mm² to 4.0mm², multiple core or pairs, and SWA armour are available upon request.

  Part No.	Description
  301-FRS015-E01P-3M05	1-pair 1.5mm2 Fire Resistant Shielded Cable, IEC 60331, Orange (500m)
  301-FRS025-E01P-3M05	1-pair 2.5mm2 Fire Resistant Shielded Cable, IEC 60331, Orange (500m)
  301-FRS015-E02P-3M05	2-pair 1.5mm2 Fire Resistant Shielded Cable, IEC 60331, Orange (500m)
  301-FRS025-E02P-3M05	2-pair 2.5mm2 Fire Resistant Shielded Cable, IEC 60331, Orange (500m)
  301-FRS015-B01P-3M05	1-pair 1.5mm2 Fire Resistant Shielded Cable, BS 6387 CWZ, Orange (500m)
  301-FRS025-B01P-3M05	1-pair 2.5mm2 Fire Resistant Shielded Cable, BS 6387 CWZ, Orange (500m)
  301-FRS015-B02P-3M05	2-pair 1.5mm2 Fire Resistant Shielded Cable, BS 6387 CWZ, Orange (500m)
  301-FRS025-B02P-3M05	2-pair 2.5mm2 Fire Resistant Shielded Cable, BS 6387 CWZ, Orange (500m)

FTTX DROP CABLE

• FTTx Drop Cables

  

  Description

  FTTx cables are used inside buildings or houses. In the center of the cable is the optical fiber, with the two parallel non-metallic FRP as the strength member, and surrounded with the LSZH jacket. These FTTx cables have the same function of the common indoor fiber cables, but it does have some special features. FTTx indoor cables are small diameter, water-resistant, soft and bendable, easy to deploy and maintenance. G.657A1 bend insensitive fiber inside, minimising optic losses due to tight bending of installation in indoor areas.

  Replace FR with SW for Steel Wire Strength Member. Kelvar FRP is also available upon request.
  * Available in PE and PVC jacket

  Part No.	Description
  306-FTH702-FRLS	2-core SM FTTx Drop cable, FRP Member, LSZH
  306-FTH704-FRLS	4-core SM FTTx Drop cable, FRP Member, LSZH
  306-FTH706-FRLS	6-core SM FTTx Drop cable, FRP Member, LSZH
  306-FTH712-FRLS	12-core SM FTTx Drop cable, FRP Member, LSZH
  306-FAH702-FRLS	2-core SM FTTx Fig-8 Drop cable, FRP Member, LSZH
  306-FAH704-FRLS	4-core SM FTTx Fig-8 Drop cable, FRP Member, LSZH
  306-FAH706-FRLS	6-core SM FTTx Fig-8 Drop cable, FRP Member, LSZH
  306-FAH712-FRLS	12-core SM FTTx Fig-8 Drop cable, FRP Member, LSZH

Vui Lòng Liên Hệ Để Được Tư Vấn Và Có Giá Tốt Nhất:

Nguyễn Trung Đức

Mobile: 0985727232         Skype: trungduc.0290   

Mail: duc.nguyen@ulcab.com.vn